fitting e-prom chip

[seanvleese]

HI can any one tell me is thier any wear in the east midlands i can go with my 1100 and have my new chip fited and setup right. i have read threads on how it shood be dun but now im so confuised. so far i have put on K/N and remus end can and link pipe and the small beaig thing has gone and have dun the switch on off twist 2 or 3 times thingy. im of to scotland in september for ten days and need to know its all ok and not going to end in tears and a very big master card bill.thanks sean

 

[Bryn]

Sean, moved this over to the East Midlands section You may get more replies

Bryn

 

[motobiker]

Probably pidcocks... loathe as I am to say that.

I guess the bike will have to go on the diagnostic gadget thingie wotsit anyway... to make sure the 'mixture' is alright... and they're the only place hereabouts that have one.

give them a call... see what they say.


.

 

[mike wright]

Dead easy to do yourself...

disconnect the battery......... lift the tank or remove it.......unscrew the 4 screws (security torx ones .ie torx bits with holes in the middle)......Unplug the long connection plug adn lift out the ECU........gently separate the the cover by using a screwdriver or something to leaver it up...you will feel the silcone coming off...Lift off the cover and remove the chip noting the cutout location points one way...... push in the new chip (dont touch the pics)....... reseal the box ...i removed all the silicone from mine and used new.....refit lid and screw together......... fit the connector back on and screw back together.... connect battery and jobs a good un!

takes 1/2 max

 

[seanvleese]

thanks mike that sounds spoton. but do i have to have the diagnostic reset ie co mix?

 

[seanvleese]

thanks tony ill give them a call sean

 

[mike wright]

thanks mike that sounds spoton. but do i have to have the diagnostic reset ie co mix?

I havent reset it...checked the plugs today and they looked perfect and the bike runs fine.