Fitting LED indicator's

[(RIP) Andy007]

My current LC has the standard indicator's fitted to it and I was thinking about replacing them with the LED version !

Has anyone done this in the past ? my reason for asking is the LED seam to be a lower voltage and does this effect the electronics on the bike in anyway i.e does it have to get re mapped at the dealer ?

Cheers
Andy

 

[DING-DONG]

No need to plug into any computer. There Plug n play

 

[(RIP) Andy007]

Ding Dong

Thanks for the quick reply

 

[DING-DONG]

Don't buy them from your dealer I think there £36 each, I brought 4 genuine brand new ones off Ebay for £64 .

 

[Matty589]

They're weren't plug and play on my GS when I swapped from regular to LED. You will get a lamp failure and they will flash erratically until your dealer changes them over in the obc. Unless you have a GS911.

 

[(RIP) Andy007]

I fitted LED's today, working ok

 

[M4TR1200GS]

They're weren't plug and play on my GS when I swapped from regular to LED. You will get a lamp failure and they will flash erratically until your dealer changes them over in the obc. Unless you have a GS911.

Pre 2008 you will

 

[sven]

Seems like an expensive upgrade to me. My standard indicators have cost me £2 for a bulb in 12k miles