Fog lights for GS not GSA

[MF-Racing]

If you're using a Hex then you don't need the OEM lights and can use any you choose. Most of which are far better.

Really, I though the OEM lights were the one to have? If they is better ones (that look the same, don’t want big square ones) please do recommend. Thanks

 

[Roadrash Rider]

Really, I though the OEM lights were the one to have? If they is better ones (that look the same, don’t want big square ones) please do recommend. Thanks

MF that’s the ones in my post above on the photo, copy BMW nano and oem Gs copy light bar?

 

[MF-Racing]

Copy bracket
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/272498359376

Lights
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/382721241470

Bad shot I know but thats the daytime running light on with spots set at 70% brightness

Plugs
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/223485218404

This is great. Might go down this route! Do you not need a switch as well?

 

[Roadrash Rider]

This is great. Might go down this route! Do you not need a switch as well?

If you use the hex ez can no as you use the turn cancel button just press and hold for 3 seconds to turn on and off

 

[MF-Racing]

If you use the hex ez can no as you use the turn cancel button just press and hold for 3 seconds to turn on and off

Prefect! Sounds like best route. Any downsides against OEM lights?

Also is the light colour same as the standard drl?

 

[Roadrash Rider]

Prefect! Sounds like best route. Any downsides against OEM lights?

Not yet same size sealed unit, same cast / plastic parts but £22 each not £200, so bound to be something but as I say happily to buy some more just as spares, a few years ago used to pay £18 just for a night star bulb.

Very close it’s cold white same as DRL

 

[GB.]

I use the hexcan system but with Denali lights mounted on crashbars, just adjusted them to only 30% power on dip as they are so damn bright!

 

[MF-Racing]

Not yet same size sealed unit, same cast / plastic parts but £22 each not £200, so bound to be something but as I say happily to buy some more just as spares, a few years ago used to pay £18 just for a night star bulb.

Very close it’s cold white same as DRL

Thanks so much! Gonna go for it.

How do you wire the lights to the ezcan? Just run a bit of wire under tank etc?

Also best/cheapest place to buy ezcan?

Thanks very much for your advice.

 

[Delboy777]

Nippy's is where you can get one.

 

[ReGenesis]

I've got one for sale

 

[MF-Racing]

I've got one for sale

How much mate and is it the latest one?

 

[ReGenesis]

You don't need the latest one for what you are looking to do.
The latest gives you the option to assign 10A to all four outputs in any configuration you want, where the 1 & 1.5 give 2x10A and 2x4A as 2x10A for lights, 2x4A for brake light and accessory.
For the lights you want to fit you won't even need 10A.
£100 posted for my Gen1

 

[MF-Racing]

You don't need the latest one for what you are looking to do.
The latest gives you the option to assign 10A to all four outputs in any configuration you want, where the 1 & 1.5 give 2x10A and 2x4A as 2x10A for lights, 2x4A for brake light and accessory.
For the lights you want to fit you won't even need 10A.
£100 posted for my Gen1

Cheers mate will have a think. Will I need anything else cables etc? Or everything complete?

 

[ReGenesis]

Lights should come with cables.
Hex comes with connectors you just solder/crimp to those if they have different ones on there.

 

[MF-Racing]

Looks like they don’t cone with cables. Anyone recommend some? Or will any 2 core wire do?

 

[Roadrash Rider]

Looks like they don’t cone with cables. Anyone recommend some? Or will any 2 core wire do?

The spots draw maximum 1.8Amps each

All you need is two runs of 6A cable at about 2 mts Halford’s do a 5mtr coil of twin, or you can find the same lights on fleebay for a bit more with wiring harness,, you will still have to change the end to connect to Ez cam. I was happy to buy the copy spots but a Chinese wiring harness with switch and relay may have many faults, may not but two runs of wiring from under seat to front of the bike isn’t too hard a task. But if not here you go. Look the same as the ones I bought but not the same supplier.

https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/372731700788

 

[Camel Toe]

Don’t mess about just fit a set of these Denalis......awesome lights and you can adjust the brightness......word of warning..everyone flashes you but as far as I’m concerned that’s a result as the fekkers have seen ya....