Front wheel bearings

[Big E]

The wheel is off a 1150 GSA.
Any recommendations as to how to get them out ?
There's hardly any lip between the inner spacer and the bearing to get a purchase for the drift to knock them out ?

Also what's the best method once there out to refit ?

 

[Mzokk]

In the past I've screwed a big rawl bolt into a bearing until it's tight. Then beat it out from the blind side. for refit leave the replacement bearings the freezer for a few hours and heat the hub with a heat gun. Use a socket that rests on the outer race to tap them in if necessary. Don't forget to insert the spacer tube before doing the second bearing

 

[(RIP) Bin Ridin]

Anyone have the bearing and seal sizes to hand?

 

[Mzokk]

3502 2rs right and 6204 2rs left

 

[(RIP) Bin Ridin]

Thank you!

 

[(RIP) Bin Ridin]

Right is 3205 2RS, not 3502, nein?

 

[Greg Masters]

Right is 3205 2RS, not 3502, nein?

Probably - I couldn't find a 3502 listed.

3205 is 25.00mm inner diameter, 52.00mm overall diameter, 20.60mm wide

 

[(RIP) Bin Ridin]

Hi, just bought a set here in Reliance Bearings, Dublin:

3205B-2RSTNC3 NSK D/R Angular Contact Bearing
6204DDUC3 NSK S/R Deep Groove Ball Bearing
CC 45 60 7 Nitrile Rotary Seal