garmin streetpilot III mount??

jailon

Registered user
Joined
Jul 1, 2008
Messages
127
Reaction score
2
Location
Leeds
Forgive me for a being a tad thick, but I have bought a streetpilot III. What sort of brackets are available (and where to get them) to allow this to fastened to an 06 1200gs, preferably one that has the ability to be powered off the bikes 12v. I have looked on the t'internet :type and am confused :nenau as to which is right kit, which is right RAM mount , do the kits come with ram mount???? etc etc

your help is needed from a novice :bow

Cheers, Jai
 
Ram mounts

Hi There,

Have a look HERE you should find what your looking for.

HTH

TJ

Forgive me for a being a tad thick, but I have bought a streetpilot III. What sort of brackets are available (and where to get them) to allow this to fastened to an 06 1200gs, preferably one that has the ability to be powered off the bikes 12v. I have looked on the t'internet :type and am confused :nenau as to which is right kit, which is right RAM mount , do the kits come with ram mount???? etc etc

your help is needed from a novice :bow

Cheers, Jai
 
The SPIII uses the cradle* from the beanbag, (also undo zinc screw and pull away the angle adjusting slide) so you have simply cradle with locking screw at the top.

* The Garmin SPIII cradle ias a spare is 010-10304-00 like this http://www.gpsw.co.uk/details/prod838.html

The standard mount for the SPIII was RAM-B-149Z-G1 http://www.ram-mount-uk.com/ram-b-149z-g1.htm and has screws to attach the cradle. Onto the oval rail ?, then RAP-319 shim will be useful as well.

To power it, if you need a lead, then bare wire ended its BEC01 http://www.gpsw.co.uk/details/prod1651.html or CLC01B with beemer plug http://www.gpsw.co.uk/details/prod1650.html
 
Neil, can you drop me an email [email protected] with details, will give you a buzz about it......very interested. Does this have everything I need? p.s. do you have paypal so I can send you the £££ straight away?
 


Back
Top Bottom