gearbox

[billywizz]

Hi lads need some help I have now got 800 miles on new clutch but now my gearbox will only go in to 1st &2nd gear the bike is 2003 gs all the best billywizz

 

[beemer pimp]

Was any work done on gearbox , check gear lever ( nut that hold lever to foot plate not loose )

 

[Timolgra]

Was any work done on gearbox , check gear lever ( nut that hold lever to foot plate not loose )

Or seized, best remove it periodically and grease all the linkage and pivot.

 

[billywizz]

No work done on gearbox linkage ok it looks like a big job may have to go in side gearbox billywizz

 

[flatdog]

Assuming the box was working ok prior to the clutch change, I'd double check all the linkages as Tim says. Take the whole assembly apart and clean it.

 

[Steptoe]

No work done on gearbox linkage ok it looks like a big job may have to go in side gearbox billywizz

Remove C clip, pop the ball socket out of the rod and see if the lever swings down and is very loose.
If it doesn't it needs the inner sleeve pushed out of the gear lever and greased/lubed.