Gs Adventurer Abs

[Richyg22]

Hi I have looked at a couple thread about ABS problems but nothing similar to mine I have a 1150 GS adventure on an 05 plate I fell off it could weeks ago the back wheels turning with the front wheel not and since then the ABS as been flashing I have looked at doing a reset but mine seems to have a different plug to all the information can find anyone to help
Cheers

 

[Ian J Hartley]

Which of these best describes your symptoms.

iABS fault codes
These should be listed on a sticker supplied with the bike.

Gen OFF, ABS ON = Only residual braking in both circuits.
Gen OFF, ABS flashes at 1Hz = ABS not available. Pull-away test not completed.
Gen OFF, ABS flashes at 4Hz = Only residual braking function available in both circuits.
Gen ON, ABS off = rear light/brake light defective.
Gen ON, ABS flashes at 1 Hz = At least one brake circuit without ABS.
Gen ON, ABS flashes at 4Hz =At least one brake circuit in residual braking function mode.
Gen AND ABS flashing alternately at 1Hz = Fluid level in Intergral ABS too low.Low-voltage

 

[tadhgocuilleain]

I'd start by looking for physical damage first. Maybe you damaged a sensor or cable, or maybe moved the sensor a bit.