nozza Registered user Joined Nov 1, 2006 Messages 247 Reaction score 0 Location Padiham. Lancs Jan 28, 2007 #1 just fitted 30mm risers to my 1200gs, could anyone one advise what torque vals i need' cheers Nozza
MiGSel Well-known member UKGSer Subscriber Joined Jan 8, 2003 Messages 1,689 Reaction score 0 Location Belgium Jan 28, 2007 #2 Here's what Mr. BMW says: Steel handlebars to fork bridge, M8 x 30, 1st front, 2nd rear -> gap at rear only (as viewed in forward direction of travel) Tightening torque: 21 Nm Cheers, Michel
Here's what Mr. BMW says: Steel handlebars to fork bridge, M8 x 30, 1st front, 2nd rear -> gap at rear only (as viewed in forward direction of travel) Tightening torque: 21 Nm Cheers, Michel
nozza Registered user Joined Nov 1, 2006 Messages 247 Reaction score 0 Location Padiham. Lancs Jan 29, 2007 #3 Cheers mig your a scholar
xylo66 Registered user Joined Aug 8, 2005 Messages 235 Reaction score 0 Location Swindon, Wilts Jan 30, 2007 #4 torque values another useful resource http://www.r1200gs.info/misc/torque.html
