Home Servicing

Miserable Git

Active member
UKGSer Subscriber
Joined
Nov 20, 2013
Messages
324
Reaction score
39
Location
Doncaster, England
I’ve got a 2012 R1200GSA that I’ve owned since September 2014 and it has now covered 45,000 miles and hasn’t visted a BMW dealer since 2,750 miles when the original owner had it. I’ve serviced it myself since but am wondering if it needs plugging in for such things as ECU updates or throttle body settings etc?
Cheers.
Chris.
 
Do you have a GS911 or know someone with one?
Looking at fault codes and running an autoscan will give you lots of info about the state of your bike.
I have serviced my bike since the warranty ended and connect the 911 as part of the servicing routing for every service, 2012 Triple Black GS now at 51500 miles.
As far as ECU updates go you do need a dealer! When I am back in the UK and need it checked the dealer I use (CW in Dorchester, they sold me the bike) will check for me and only normally charges me if there is an update due, don't know about other dealers though!
 
Hoff said:
Do you have a GS911 or know someone with one?
Looking at fault codes and running an autoscan will give you lots of info about the state of your bike.
I have serviced my bike since the warranty ended and connect the 911 as part of the servicing routing for every service, 2012 Triple Black GS now at 51500 miles.
As far as ECU updates go you do need a dealer! When I am back in the UK and need it checked the dealer I use (CW in Dorchester, they sold me the bike) will check for me and only normally charges me if there is an update due, don't know about other dealers though!
Click to expand...

I serviced my 2012 twin cam this year, all the servicing tasks are straightforward. Borrowed a GS911 from the BMW Club tool hire scheme, together with special tools for changing the timing chain cover. It’s a good scheme and the main reason I keep up my membership.


Sent from my iPhone using Tapatalk
 
+1 on the UK club’s tool hire scheme, helped me service my 2012 R....


Sent from my iPad using Tapatalk
 
Thanks for the replies. It runs fine but was just curious to know. I guess I’ll just keep servicing it regularly and see what happens.:beerjug:
 
Been reading this with some interest. In a similar position. New to me 2011 GSA , FSH and to date has behaved impeccably - as of last Oct. I'm about to extend the enjoyment when I take it down to Italy in a few weeks.

My plan is just to change the oils and filter. Then continue enjoying it. Even that is probably overkill, but I would be interested to plug in a GS911.

Anyone in N London, roughly, who'd be willing to plug in theirs? I don't have one as yet.

Cheers



Sent from my SM-N910F using Tapatalk
 
If you want to service it properly, you ideally need a GS911 for parking the idle steppers during throttle balancing, re-calibrating idle steppers, checking and resetting fault codes, service indicators etc etc.

Coupled with it being a diagnostic tool that can prove switches and components operation and log realtime data, they are simply worth the investment.
 
Slipperyeel said:
Been reading this with some interest. In a similar position. New to me 2011 GSA , FSH and to date has behaved impeccably - as of last Oct. I'm about to extend the enjoyment when I take it down to Italy in a few weeks.

My plan is just to change the oils and filter. Then continue enjoying it. Even that is probably overkill, but I would be interested to plug in a GS911.

Anyone in N London, roughly, who'd be willing to plug in theirs? I don't have one as yet.

Cheers



Sent from my SM-N910F using Tapatalk
Click to expand...
Problem with the hobbyist version of the 911 is that you can only do full diagnostics on a maximum of 10 bikes.
You can do it multiple times on each bike, but there are only 10 ‘slots’.
So it’s a big ask to ‘borrow’ a hobbyist 911.
The ‘Pro’ version has unlimited slots but it’s more expensive.
 
Points to the fact that if you want to service it properly its worth the investment unless you know someone with a pro version!
 
Gents. You're quite right about investing in a GS911. And yes, I will need to do it. Though if probably get the hobbyist version...

I was unaware of this issue with the 'slots' per devise, so i can see how it might be an issue for some people. Though 10 is quite a few, assuming you had just one bike - that could equal x10 secondhand 'sell ons'.

Unless somebody has one they're thinking of selling?



Sent from my SM-N910F using Tapatalk
 
AberdeenAngus said:
Problem with the hobbyist version of the 911 is that you can only do full diagnostics on a maximum of 10 bikes.
You can do it multiple times on each bike, but there are only 10 ‘slots’.
So it’s a big ask to ‘borrow’ a hobbyist 911.
The ‘Pro’ version has unlimited slots but it’s more expensive.
Click to expand...

You can unlock the Hobbyist version to unlimited pro for a smallish fee.
 
Not sure if it is applicable for your bike, but at least for the older hexheads there was a recall to replace the flange which the rear wheel is bolted to from an aluminum to a steel part. Might be worth to give the dealer a call and ask them check (unless yours has the upgraded version).
 
Roughly £175 to do an upgrade from enthusiast to pro for a BT / hexhead vwesion
 
If you only need a few more VIN, that works out quite expensive. A pity they don't sell incremental blocks of free slots, say blocks of ten instead for a smaller fee.
 
Nippy Normans supply Touratech, Wunderlich, Desert Fox and many other makes of accessories.
You must log in or register to reply here.

Similar threads

Smithmas
Tools - Home Servicing and Maintenance
2 3 4
Replies
76
Views
7,497
Mr Bean
Mr Bean
Riko
Triumph Tiger 900 GT Pro Servicing costs. Thoughts ?
2
Replies
20
Views
4,010
IJL99
snerkler
Service inclusive pack and servicing queries?
Replies
10
Views
1,440
snerkler
snerkler
Planning a trip and servicing
2
Replies
38
Views
3,197
steadysteve
tspivey
R1250 self/home servicing
Replies
17
Views
3,809
autogs
autogs


Back
Top Bottom