I've 3D printed quadlock for Aoocci C3 and others?

[dp66]

Hi all. Whilst the C3 is all I need, I want it to be easily removable for when the bike is not in either the garage or the works basement car park. Power is easy if you use a USB power socket near the device but the mount is a different story.

I use quad lock all over the place so 'borrowed with pride', i.e. blantantly copied a 3D print quadlock female socket and added it to a base plate with hole spacing to match the C3 mounting plate. Looking at the other Aoocci units, it might fit the C5 and C6 models as well

Does anyone else use quadlock and want one? I can bash a few more out if needed. The hole spacing on the mount is a slightly odd 61mm x 29mm so if you have a C5 or C6 it would be worth checking.

 

[MacJ]

My C5 Pro has a 3 screw fitting as shown here so unfortunately it won't fit mine.

 

[Ron Gibson]

Hi all. Whilst the C3 is all I need, I want it to be easily removable for when the bike is not in either the garage or the works basement car park. Power is easy if you use a USB power socket near the device but the mount is a different story.

I use quad lock all over the place so 'borrowed with pride', i.e. blantantly copied a 3D print quadlock female socket and added it to a base plate with hole spacing to match the C3 mounting plate. Looking at the other Aoocci units, it might fit the C5 and C6 models as well

Does anyone else use quadlock and want one? I can bash a few more out if needed. The hole spacing on the mount is a slightly odd 61mm x 29mm so if you have a C5 or C6 it would be worth checking.

View attachment 369975

Very interested if you're going to make some more, just about to order a C3.

 

[Deise]

Interested if possible please

Ballpark for cost ?

thanks for sharing this

 

[dp66]

Happy to do a few for just the cost of postage. So if you want it quick (although I realise that's subjective when RoyalMail is involved) £6, if you're happy to go slow then £3

 

[Guru Gora]

I’ll take one please.

Happy to round up the cost to cover your time.


Sent from my iPhone using Tapatalk

 

[Guru Gora]

Sure people are aware but good deal here …

Sent from my iPhone using Tapatalk

 

[Ron Gibson]

Happy to do a few for just the cost of postage. So if you want it quick (although I realise that's subjective when RoyalMail is involved) £6, if you're happy to go slow then £3

Yes please for me, snail mail is fine. Will pm you for payment details and delivery address.

 

[Deise]

Yes please

will pm for payment + address

thanks again

 

[Daffy]

Ooh, yes please.

I’ll pm you for payment details.

 

[dp66]

OK chaps, I'll print off a bunch of these.

A couple of things to note. Although printed using the tougher/UV resistant filament PETG, the design hasn't been exhaustively tested, although I have a disklock mount printed with the same stuff and that is proving to be ok but use it at your own risk. Also you will need some longer M4x12mm bolts as the ones supplied will be too short.

Thanks for the DM's so far, can the rest of you DM me with address please.

 

[andrewb2006]

Brilliant just what I need

Thanks I’ve sent you a pm

 

[Pepsi]

3D printers are great inventions aren’t they?

I did laugh when I read this though, I’ve seen numerous and quite passionate posts on here in the past criticising cheap Chinese copies of bike parts and yet when one of our own, ‘copies’ a no doubt Patented part everyone wants a piece of the action.

 

[dp66]

I've now run out of the PETG filament, so I'm calling a halt to these for now.

 

[SBD]

I too have 3D printed disc lock carriers for my bikes. Really very useful.

 

[Guru Gora]

Payment sent


Thanks


Sent from my iPhone using Tapatalk

 

[Guru Gora]

If anyone wants the 12mm M4 in black pm me. I’ve got a truck load of them


Sent from my iPhone using Tapatalk

 

[andrewb2006]

Mine arrived this morning and works a treat thanks.

Can anybody advise do you pair your headset to the Aoocci or to the phone ?

 

[Daffy]

Mine arrived this morning and works a treat thanks.

Can anybody advise do you pair your headset to the Aoocci or to the phone ?

Similar, mine arrived this morning and what a super bit of kit - thanks to Darren for the offer to share his innovation- that’s what makes this forum brilliant - top job mate.

 

[Drew Hager]

Mine arrived this morning and works a treat thanks.

Can anybody advise do you pair your headset to the Aoocci or to the phone ?

Is the blue card tray made by a 3D printer? Can easily remove the C3 from the bike with this?