LED Tail/Brake Light - R1150GS & R1150GSA

[Annette]

It's been a while but we've now got these amazing LED tail/brake lights back in stock. We've all got them on our bikes and the difference in brightness is absolutely amazing.

They have been upgraded and improved. The boards now contain 36 LEDs with an additional 6 white LEDs for the number plate illumination.

Cost £45.00

Full specification

We believe no other manufacturer offers this quality of components and quantity of LEDs meaning that these offer the greatest light output.

A high quality LED light panel professionally designed and manufactured in the United Kingdom.

The boards now contain 36 LEDs with an additional 6 white LEDs for the number plate illumination.

The panel fits 1100GS; 1150GS and 1150GSA with or without ABS and with or without IBS.

Meets with SAE/ECE/JIS automotive colour requirements.

There is a jumper to bypass the IBS circuitry if you don't use it.

Connector to allow LED indicator inserts to act as switchable FOG lights without upsetting the brake function of the main light. Max load 1A.

Connection to existing loom with original connectors - no cutting - so completely reversible

Fits in less than 10 minutes; completely reversible; full instructions - fit and forget.

No more blown bulbs.......

 

[essjay]

Any side by side shots of a bike with one fitted and a bike without?

 

[Stormforce8]

Any side by side shots of a bike with one fitted and a bike without?

All we have at the moment is this one -with brake light activated.

Hopefully we'll be able to get some new pics for comparison at the weekend

Rest assured that these are a massive improvement over the standard bulb - and we firmly believe you cannot buy a better LED rear light for your BMW

 

[essjay]

Yeah I'd like to see a difference between the standard bulb and the light panel (neither in brake mode).

 

[D6]

looks better than some, the leds for the no plate are reversed so no white light at the rear like some others,
i have a different make one, only prob with these is to make sure the lens rubber seal is ok as they cant take water like a bulb, its brighter than a bulb, definably

 

[Surrey Yeoman]

.............if only someone sold a clear rear lens to go on the 1150 GSA, that doesn't require faffing about to make it fit....................

.............then I might be tempted..................

 

[chad]

.............if only someone sold a clear rear lens to go on the 1150 GSA, that doesn't require faffing about to make it fit....................

.............then I might be tempted..................

at the risk of sounding condescending !

what exactly requires 'faffing about' with when you only have two screws an a lens to deal with

 

[GunZenBomZ]

They look good Annette.

 

[mr_magicfingers]

.............if only someone sold a clear rear lens to go on the 1150 GSA, that doesn't require faffing about to make it fit....................

.............then I might be tempted..................

This what you were after?

http://www.emotouk.com/bmw/r1150gs_lighting.htm

 

[Stormforce8]

This what you were after?

http://www.emotouk.com/bmw/r1150gs_lighting.htm

Seeing this post has put me into true UKGSer 'Tosser' mode -


mr_magicfingers - YOU SIR ARE A TWAT

That is all

 

[mr_magicfingers]

I was simply trying to help, obviously I have missed some subtle subtext here.

 

[GunZenBomZ]

Definition. TWAT, There Was A Time

Hmm you were too slow with replying Hope your well Mr_MagicFingers

ps: http://acronyms.thefreedictionary.com/TWAT

 

[Surrey Yeoman]

at the risk of sounding condescending !

what exactly requires 'faffing about' with when you only have two screws an a lens to deal with

Alas, I bought one a while ago from "ProjectR" (who sell on ebay too) and it didn't fit. Sent it back and got a replacement. Still didn't fit. Spoke (via email) to Jaws on this forum and he told me that these lenses made by "Clear Solutions" are made for the US market and the US spec bikes had a different lamp unit (WHY????), so it needs a bit of a modification to get them to fit a UK spec lamp unit. The screw posts on the lens are about 3mm or 4mm too low to marry up with the screw posts on the UK spec lamp unit.

That's what I call faffing about!

magicfingers - thanks for the link, but they're selling the same lens by Clear Solutions, (product code CTL-0069) so alas I'm no further forward.

Thanks guys,

 

[Surrey Yeoman]

This what you were after?

http://www.emotouk.com/bmw/r1150gs_lighting.htm

BEWARE!
After a quick look around the emotouk.com / Ita-Moto website I was struck by the fact that nowhere on it does it give either phone numbers or an address for them.

Now that always makes me suspicious!

Quick google search turned up a Ducati owners forum....................

http://www.ducatisti.co.uk/forum/online-retailers/44503-ita-moto-scam-artists.html

..............and it seems that all is not well with this particular firm.

Seems that "Emoto" went tits up owing people lots of money and it appears to have resurrected itself as "Ita-Moto" and is still taking people's money and not coming up with the goods.

Now I may be getting the wrong end of the stick and if I am I apologise, but after getting burned for a little over two-hundred quid when BMWBikeBits did a vanishing act, I'd be very dubious about buying anything from Ita-Moto.

Just my tuppence worth.

 

[D6]

Alas, I bought one a while ago from "ProjectR" (who sell on ebay too) and it didn't fit. Sent it back and got a replacement. Still didn't fit. Spoke (via email) to Jaws on this forum and he told me that these lenses made by "Clear Solutions" are made for the US market and the US spec bikes had a different lamp unit (WHY????), so it needs a bit of a modification to get them to fit a UK spec lamp unit. The screw posts on the lens are about 3mm or 4mm too low to marry up with the screw posts on the UK spec lamp unit.

That's what I call faffing about!

magicfingers - thanks for the link, but they're selling the same lens by Clear Solutions, (product code CTL-0069) so alas I'm no further forward.

Thanks guys,

strange? cos it fitted straight on mine,,,,and mines a english un

 

[chad]

the lenses from NN fit just fine with no faffing

 

[Roger Chatterton]

Now if you did one for the Airheads -100GS PD in particular .........
Now I know Chad drools over the GS PD's, so how about it ?

 

[RPMINC]

Annette any possibility of getting these to me across the pond , I live in the states but would love to upgrade my GS with this if possible , currently I am trying to mod it with an LED light bar that you see in emergency vehicles , but this would be better, Regards Rich

 

[Annette]

Hi Rich

No problem to ship to the USA. Just order straight through the website. When you put in your address the UK VAT will automatically be deducted and the shipping cost to the USA will be worked out. Total price will be £45.80. Package is shipped using Royal Mail AirSure so it is trackable from the time of despatch.

Regards
Annette

 

[Surrey Yeoman]

the lenses from NN fit just fine with no faffing

Sadly, NN's don't seem to have a clear rear lamp lens listed for the 1150GSA anymore.