Mirror extenders

[ricalnic]

Can anyone point me towards some mirror extenders, like the type below which will lift the mirrors 30mm or so from original height.
http://www.ebay.co.uk/itm/Mirror-Ad...A%2BFICS%2BUFI&otn=21&pmod=160579058965&ps=54

It would also be good to know what thread spec I should be looking for.

Thanks

 

[Pablo1]

Can anyone point me towards some mirror extenders, like the type below which will lift the mirrors 30mm or so from original height.
http://www.ebay.co.uk/itm/Mirror-Ad...A%2BFICS%2BUFI&otn=21&pmod=160579058965&ps=54

It would also be good to know what thread spec I should be looking for.

Thanks

here you go
http://www.nippynormans.com/product...f650-twin-f700gs-f800gsr-r1200gsr-wun-8160447

 

[ihandyman247]

The one's from NN are not compatible with GSA models!

 

[kimbo]

The ones in your pics are not the NN ones in the link I think.

 

[itspilsbury]

The one's from NN are not compatible with GSA models!

Oh, That's what I have on my 2011 GSA, bought them originally for my F650GS twin that I transfered them from when I traded it in for the new Camhead.

 

[Pablo1]

The ones in your pics are not the NN ones in the link I think.

no your right there not, bought mine used on here, fitted my gs and now my gsa

 

[ricalnic]

here you go
http://www.nippynormans.com/product...f650-twin-f700gs-f800gsr-r1200gsr-wun-8160447

View attachment 217030

View attachment 217031

I had seen these, but really just wanted to lift in height straight up

 

[Earache]

I'll make a set of them for you if you'd like - just pay for the postage, which I'd guess to less than $8.00 or so.

All I need is the thread size and pitch (probably a M10 X 1.50 or 1.25) and how long you want them. Super easy to make, I've made quite a few in the past for friends on various types of bikes.

Eric

 

[Fanum]

Can anyone point me towards some mirror extenders, like the type below which will lift the mirrors 30mm or so from original height.
http://www.ebay.co.uk/itm/Mirror-Ad...A%2BFICS%2BUFI&otn=21&pmod=160579058965&ps=54

It would also be good to know what thread spec I should be looking for.

Thanks

HERE???

30mm exactly

Ignore the bodgy welding and stuff I did to them......that was just to get an angle to the extension as well.

Look at he first pic of my K and you'll see the extender in place, in the shot with the bicycle mirror on...it's the hexagonal silver thingy that you'll also see a pair of on top of the vice before I butchered them.

You will need to stick an Allan head bolt through from underneath (or a hex head bolt if you want) to pop out and screw the extended nut onto, and if you want to do it properly you may want to fekk around with a locking nut, or at the least some decent thread seal, but those things are pennies from most engineering fastener shops.

 

[Humbug]

I believe the thread at the base of the stem of the R1200GS mirrors are a left hand thread and they are 10mm x 1.25 pitch. This threads into an adapter which then screws to the bar mount. This, I believe has a M10 x 1.25 R/H thread. Your extender would be dependent on exactly where it would be mounted. Hope this makes sense! I mounted some GS mirrors to another bike and used THESE.