Mounting Navigator II on 1200 GSA

[HondaMan]

Hi

I have just got hold of a BMW Navigator II and would like to know what brackets people have used to mount on the screen brace.

I have looked at the Migsel, but it seems a tad expensive.

Not sure that RAM do one....?

EDIT: I dont really want anything with a ball and an arm as I want the fitting to be close to the screen brace to minimise vibration. IE this on eBay not really what I am after.

Thanks

Richard.

 

[John Armstrong]

Have you looked at the BM option?

Clamps to the upper cross bar, and above engine idle speeds, vibration isn't a problem.

Might have one for sale

 

[HondaMan]

Thanks for that, I didnt know BM made one.....got any pics?

And how much?

 

[John Armstrong]

It's this one: http://www.ukgser.com/forums/showthread.php?t=160125&highlight=mount

I need to confirm I still have it though

Easy to adjust the angle of viewing and once the Nav 2 is locked in place using the security screw, you can roatate the mount / gp so that it's almost impossible to get at the screw. So harder for an opportunist thief to nick the gps unless they know about the screw and the rotation

 

[Schtum]

There's also the GSA sat-nav mount from Alder Enterprises.....

http://www.motorradonline.co.uk/navmountgs.html

Available from here.....

http://stores.ebay.co.uk/alderenterprise0138

 

[frank1200]

can anyone recomend how to mount a nav3 onto a touratech gps bar which goes over the clocks on a standard gs
the mount shown above is no good as the touratech bar is much smaller diameter than the gsa windscreen brace
cheers

 

[HondaMan]

Thanks for all the suggestions, I bought the one from John in the end.

can anyone recomend how to mount a nav3 onto a touratech gps bar which goes over the clocks on a standard gs
the mount shown above is no good as the touratech bar is much smaller diameter than the gsa windscreen brace
cheers

Frank, I also got a bracket from a mate of mine which is designed for a thinner diameter tube. Its a plastic part and I am told its BMW. I will try and post a pic later.

 

[HondaMan]

can anyone recomend how to mount a nav3 onto a touratech gps bar which goes over the clocks on a standard gs
the mount shown above is no good as the touratech bar is much smaller diameter than the gsa windscreen brace
cheers

This is what you need. Sorry, no part number on it but try the BM dealers.

 

[jandjtouring]

Thats the part from a R1200rt bar mount let me know if you get stuck sure i have one from my old bike.
john