Nippys bar risers

[beemerman]

Hi guys, anyone out there with Nippys up & back risers on a 1200GS?

I do not want to put on longer hoses & i see from his website that it is possible to reroute them UNDER the yoke. has anyone done this? do the hoses rub on the forks ?.

Please help as i need to get something to releive the stiff neck i get.

PS no wise cracks

 

[Humbug]

Yes - I've fitted them and routed only the brake hose under the top yoke - the clutch hose is long enough. I also routed the electrical cables under the top yoke as they are a bit tight otherwise. The brake hose does touch the lower part of the top yoke but I've positioned a small grab tab to protect it - had them on for well over 1000 miles now with no problems.

Andy

 

[bustupbiker]

As above and no problems.

 

[Yellow Peril]

15 K and no problems to date, all as above.

 

[NeilG]

Fitted up & back risers with Renthal FatBars (less sweep than standard), didn't need to change hoses / cable routing.

(riding position much improved.....)

 

[ECM]

. The brake hose does touch the lower part of the top yoke but I've positioned a small grab tab to protect it -

Andy

What's a "grab tab" please??