Noise from Left side sounds like a bag of bolts

[Irishdude]

I had to get new things for the exhaust because the old ones I grinded off last year to get the bike apart

 

[Deleted account 191119001]

Same foto with flash on

Hmm nice gap in that O ring

 

[Irishdude]

So the bike started and kept running the second time after I noticed this the first time when it stopped.

 

[Irishdude]

Yeah hand tight is just not really tight enough

 

[Deleted account 191119001]

Yeah hand tight is just not really tight enough

because the beer is empty

 

[Irishdude]

because the beer is empty

Empty beer crates proves how hard we were workin on the bike

 

[Irishdude]

Is this something to worry about ?
After putting all the thing back together I saw this on the table, it goes under the battery tray and I forgot to put it back there .

 

[Irishdude]

Also since the bike was all apart and all I took out the fuel float meter thing because for years it did not show when I filled the tank, I could only see the fuel bars when it got close to empty,
So I took it out saw that when the float goes up it didn't touch the metal, so I gave it a little tweak now it does,
Time will tell if I fixed it or made it worse.

 

[Deleted account 191119001]

Is this something to worry about ?
After putting all the thing back together I saw this on the table, it goes under the battery tray and I forgot to put it back there .

Cable guide so useful for the cables...................



image hosting

 

[Irishdude]

Oh for the final drive I thought a new one to replace my worn out one was too expensive so I bought this one from a GS to go onto my GSA and it fits,
I just had to mark it with a marker to make sure I put it on to match the way it goes on

 

[Irishdude]

the new one matched my old one in every way except the old one had that special spline thing that set the way it goes,
That's why I had to use the marker

 

[Irishdude]

Cable guide so useful for the cables...................



image hosting

I just hope its not some sort of heat shield for the said cables

 

[Deleted account 191119001]

I just hope its not some sort of heat shield for the said cables

Quite a solid piece of metal so certainly has its use, maybe to support the weight of the battery as to not squash the cables.

 

[Irishdude]

Quite a solid piece of metal so certainly has its use, maybe to support the weight of the battery as to not squash the cables.

Na the tray is thick enough for that job,
I just hope I can get away with not putting it back in there

 

[Alwaysawayround]

Na the tray is thick enough for that job,
I just hope I can get away with not putting it back in there

I just sat and read through this, just wanted to say fair play to you sir great achievement and very interesting to see inside and out. When your car broke I was like F#$king S¥^t B@$!@€$d

Sent from my SM-N950F using Tapatalk

 

[Irishdude]

So here she is as good as finished

 

[Irishdude]

Wheeled her out of the mancave

 

[Irishdude]

I was a little bit nervous but it went ok except the ABS didn't turn on, so I have to check that out,
But the engine worked very smooth, throttle was different due to new cables I suppose, and the bike seemed a bit quicker than before but it has been a while since I rode it last.

 

[Irishdude]

With a big thanks to me Buddy Koen, he just knows things about bikes

 

[Irishdude]

Hopefully when I get the feckin ABS sorted then I can put the rest of the bits on the bike.