ODBStar Moto Guzzi Diagnostics tool

Fluffmeister

I think I'm a Guzzista now
UKGSer Subscriber
Joined
Apr 5, 2012
Messages
4,729
Reaction score
812
Location
North West
Ordered a Guzzi specific ODBStar diagnostics tool and it landed from China in 3 days, well packed and well spec'd and so far really happy with it. It works with the Stelvio and the V7 and allows you to diagnose faults, read codes and configure accessories.

As much as I love A&D (Watching for the spies :) :) ) it's a 100 mile round trip so if I needed to reset a DTC or the service light, it's half a day :)

Last night I fitted the Guzzi alarm system to the Stelvio, it needed coding in, the ODBSTAR detected it, I enabled the alarm, cycled the ignition and it's working perfectly.

Anyway, the point to the post is if anyone in the Northwest needs diagnostics or a service light reset, accessories coding in I'm happy to do that, I do know what I'm doing :) I'm a long term ODBEleven and VCDS user and work with them computermabobs for a living.

It's a decent bit of kit and pretty intuitive to use so far, there have already been 2 OTA updates.

20260518_075606269_iOS.jpg20260518_080119343_iOS.jpg20260518_075531718_iOS.jpg
 
Ordered a Guzzi specific ODBStar diagnostics tool and it landed from China in 3 days, well packed and well spec'd and so far really happy with it. It works with the Stelvio and the V7 and allows you to diagnose faults, read codes and configure accessories.

As much as I love A&D (Watching for the spies :) :) ) it's a 100 mile round trip so if I needed to reset a DTC or the service light, it's half a day :)

Last night I fitted the Guzzi alarm system to the Stelvio, it needed coding in, the ODBSTAR detected it, I enabled the alarm, cycled the ignition and it's working perfectly.

Anyway, the point to the post is if anyone in the Northwest needs diagnostics or a service light reset, accessories coding in I'm happy to do that, I do know what I'm doing :) I'm a long term ODBEleven and VCDS user and work with them computermabobs for a living.

It's a decent bit of kit and pretty intuitive to use so far, there have already been 2 OTA updates.

View attachment 504303View attachment 504304View attachment 504302
Will it do euro 5+?
I assume it won't turn off the service due spanner?
 
It does and it will, the first update it picked up OTA added E5+ support and Service Indicator Reset.

Both mine are Euro V+ Al.
 
Last edited:
Great offer mate.

I’ve done same with car bmw diagnostics and bimmer code….. now I’ve sold the car 😂😂
 
can it code new keys ?

As of the last update it has the option to duplicate keys.

Here's the functionality matrix for my Stelvio E5+


EEPROM reset
Twistgrip Self-Learn
Throttle Self-Learn
Vehicle config. (Km)
Vehicle config. (miles)
Vehicle setup reset
Service reset
Restore user code
Change keys stored
Odometer writing
Write
Front bleed
Rear bleed
TPS reset
Self-adapt.par.reset
Reset self-adapting parameters
Throttle position self-adapt
Self-learning par.reset
Control unit EEPROM reset
Phonic wheel reset
Write VIN
Key err.count reset
RADAR BLIS system disabling
RADAR BLIS system enabling
TPMS system disabling
TPMS system enabling
QuickShift disabling
QuickShift enabling
Vehicle configuration with front and rear radar (km)
Vehicle configuration with front and rear radar (mi)
Reset keys
Gasoline level calibration
Front wheel TPMS learning
Rear wheel TPMS learning
Vehicle configuration
Driver saddle heater test
Passenger saddle heater test
Windscreen test
Vehicle conf. basic (Km)
Vehicle conf. basic (Mi)
Vehicle configuration S version (Km)
Vehicle configuration S version (Miles)
Wings test
Front RADAR system disabling
Front RADAR system enabling
Rear RADAR system disabling
Rear RADAR system enabling
TPS zero-setting
Disable heated handgrips
Enable heated handgrips
Vehicle conf. Km °C
Vehicle conf. Mi °F (UK)
ECU coding
Activation of front wheel ABS pump and solenoid valves
Activation of rear wheel ABS pump and solenoid valves
Reset of the adaptive values relating to the knock control
IMU write


Just to add, I'd defer to your knowledge if anything looks a little ropey :) You know way more about the Mandello machines than me.
 
Last edited:
ODBStarStore


Took about 3 days after order confirmation from China to be delivered to U.K. with no additional fees.

Hope that helps 👍
 


Back
Top Bottom