Oil level window - replacement?

[gbpot]

Can this be replaced?
I Can't see through the inspection window, all dark, (or is it all oil?).
Looks like a previous owner has cleaned it and left it scuffed. So can it be replaced?
Gavin

 

[TheWarlock]

Lie the bike over towards the opposite side and get a mate to check the level window to see if the 'darkness' drops. If it does the bike is over-filled assuming of course you are checking it on a level surface with the bike upright.

 

[niko]

Lie the bike over towards the opposite side and get a mate to check the level window to see if the 'darkness' drops. If it does the bike is over-filled assuming of course you are checking it on a level surface with the bike upright.

or just start the bike

 

[Boon]

10 min job to replace if its knackered.

just poke a screw into it and pull it out


push home the replacement, the edges are just like a push fit oil seal

 

[gbpot]

Lie the bike over towards the opposite side and get a mate to check the level window to see if the 'darkness' drops. If it does the bike is over-filled assuming of course you are checking it on a level surface with the bike upright.

Or just start the bike.


Why did'nt I think of that? Ta guys. level is at the top of the red circle.

 

[Welshman]

If it takes ten minutes to change, you are pissing around, its that simple

 

[Steptoe]

A picture "How to" from a while ago - [URL="http://www.ukgser.com/forums/showthread.php?t=136604&highlight=oil+sight+replacement"]HERE[/URL]

 

[gbpot]

A picture "How to" from a while ago - [URL="http://www.ukgser.com/forums/showthread.php?t=136604&highlight=oil+sight+replacement"]HERE[/URL]

Thanks Steptoe,
Brill as usual.