mwalters
Guest
has anyone had a problem with their preload adjuster, mine is stuck or is the shock knackered gs 1150
If it's the standard unit mine stuck as well.
I removed the hand wheel and freed up the adjuster by putting a spanner on the shaft and gradually working it back and forward with some WD40 sprayed on the shaft/cylinder join.
It eventually loosened and I replaced the hand wheel.
After that I made a point of adjusting it every couple of weeks.
I removed the hand wheel and freed up the adjuster by putting a spanner on the shaft and gradually working it back and forward with some WD40 sprayed on the shaft/cylinder join.
It eventually loosened and I replaced the hand wheel.
After that I made a point of adjusting it every couple of weeks.
mwalters
Guest
cheers i'll try it
Similar threads
