Puig Touring Screen not quite high enough

[GSJones]

Hi
The Puig screen I have is significantly better than the oem. However, it's still an inch or two too short to provide clean air for the top of the helmet. Is there a spoiler type product out there that fits on the Puig screen to sort this?
Thanks

 

[KJB]

Yes Puig have their own call one of the dealers who supply should be able to help, I had the same problem, it’s a bolt on extra

Good luck

 

[GSJones]

Great. Thanks for that, I'll have a look for that.

 

[Phill Elston]

This was the best price place I found when looking for mine...

http://www.motorcycle-exhausts.co.uk/Puig_Screen_Deflectors--category--1436.html

 

[AHaywood]

I use the 'screw on' multiregulable version. I'm 6'1 and no wind buffeting whatsoever.

 

[GSJones]

Thanks for the link. Would I have to drill the screen for the screw on version?

 

[mcinlb]

I use the 'screw on' multiregulable version. I'm 6'1 and no wind buffeting whatsoever.

Yes, this one for me
http://www.motorcycle-exhausts.co.uk/PUIG_CLIPON_Multiregulable_Visor__3__SIZES--product--15966.html

 

[jags]

Yes, this one for me
http://www.motorcycle-exhausts.co.uk/PUIG_CLIPON_Multiregulable_Visor__3__SIZES--product--15966.html

i have one of those. if you can get the mra equivalent to fit i think that would be better as it is a bit bigger.

 

[GSJones]

There are 3 sizes of spoiler. Does anyone know which one should fo on the touring screen? The Puig website dowsn't give any information that I can see. Thanks

 

[yofi]

Anybody seen this? My understanding is that it's still a prototype. https://www.youtube.com/watch?v=Jgm57V9DXjQ

 

[POL382]

A cheaper alternative.

https://www.aliexpress.com/item/Adjustable-Upper-Windshield-Variable-Spoiler-Windscreen-for-BMW-R1200GS-K1200R-S1000RR-F650GS-G650GS-C650GS-F700GS-F800R/32835017211.html?ws_ab_test=searchweb0_0,searchweb201602_3_10152_10065_10151_10344_10068_10130_10345_10324_10342_10547_10343_10340_10341_10548_10542_10541_10190_10562_10084_10083_10307_10301_10303_10539_10312_10059_10313_10314_10184_10534_10533_100031_10604_10603_10103_10594_10557_10596_10595_10142_10107,searchweb201603_25,ppcSwitch_5&btsid=6e4c3922-7b79-457a-ae29-3bcb05962104&algo_expid=3cc191f9-7013-440e-aeae-dcf0aab4a692-3&algo_pvid=3cc191f9-7013-440e-aeae-dcf0aab4a692&rmStoreLevelAB=5

 

[POL382]

Anybody seen this? My understanding is that it's still a prototype. https://www.youtube.com/watch?v=Jgm57V9DXjQ

I seem to recall something similar being released shortly after the LC's were launched but it was withdrawn quickly with no explanation. Probably not man enough to operate the screen at high speed.

 

[GSJones]

Just resurrecting this thread. I bought a fairly cheap spoiler to see whether it would solve the airflow issues. It has but it's a bit like putting a brick on top of your screen. I've only been out once on the bike since fitting so I might get used to it but not sure it will improve.

The spoiler does the job amd is about 2.5 inches above the puig screen. Is there a screen out there around this size?

 

[tarry]

A cheaper alternative.

https://www.aliexpress.com/item/Adjustable-Upper-Windshield-Variable-Spoiler-Windscreen-for-BMW-R1200GS-K1200R-S1000RR-F650GS-G650GS-C650GS-F700GS-F800R/32835017211.html?ws_ab_test=searchweb0_0,searchweb201602_3_10152_10065_10151_10344_10068_10130_10345_10324_10342_10547_10343_10340_10341_10548_10542_10541_10190_10562_10084_10083_10307_10301_10303_10539_10312_10059_10313_10314_10184_10534_10533_100031_10604_10603_10103_10594_10557_10596_10595_10142_10107,searchweb201603_25,ppcSwitch_5&btsid=6e4c3922-7b79-457a-ae29-3bcb05962104&algo_expid=3cc191f9-7013-440e-aeae-dcf0aab4a692-3&algo_pvid=3cc191f9-7013-440e-aeae-dcf0aab4a692&rmStoreLevelAB=5

Have you got one of these Pol? if so how`s the look and fit on a standard gsa screen?

 

[Bounce]

I've just bought a double bubble screen for my SA 1290 as per link:

http://www.motea.com/en/wind-protec...adventure-15-16-dark-smoke-i4108-124473-0.htm

As it's alot smaller than the OEM screen (lose circa 4-5 inches from the height) the compatible adjustable spoiler that Puig make is this one which I may buy, or perhaps the MRA X creen spoiler:

http://www.mandsmotorcycles.co.uk/shop/puig-multi-adjustable-clip-on-visor

The M&S one was the best price I could find in the UK

 

[simon26]

Out of interest gents what screens are people using -

Currently got the standard GS one on however being 6,1 - I'm not getting clean air - I did think about putting an extension on but I dont know if that will make much difference but then looked into the GSA screen but very expensive -

Sorry for hijacking the thread but any advice appricated and also following this.

cheers
Simon

 

[Nin]

I use the standard GSA screen with MRA xScreen jobbie. I’m 6’3” with seat set on extra high, and I can now ride comfortably at any speed with visor up. I did find it needed the Cymarc screen brackets to give it a bit more stiffness ooer.

Sent from my iPhone using Tapatalk Pro

 

[fred_jb]

Out of interest gents what screens are people using -

Currently got the standard GS one on however being 6,1 - I'm not getting clean air - I did think about putting an extension on but I dont know if that will make much difference but then looked into the GSA screen but very expensive -

Sorry for hijacking the thread but any advice appricated and also following this.

cheers
Simon

There is a discussion on the Slipscreens screen here: http://www.ukgser.com/forums/showthread.php/468568-Slipscreens

I have the tall version of this, which I believe is based on the GSA screen (but much cheaper), and is available with the option of 440 mm or 490 mm height at no extra cost.

Fred