R12 G/S Enduro

Thanks
Spoke with Evotech today and they could not tell me if there 2024 r12 guard will fit
The coolers are the same but I see the r12gs has a surround all over it which the r12 doesn’t have
 
Thanks
Spoke with Evotech today and they could not tell me if there 2024 r12 guard will fit
The coolers are the same but I see the r12gs has a surround all over it which the r12 doesn’t have
Here are the pictures (pre cleaning) of the plastic mesh I fitted to the inside of the stock guard and secured it with four spots of plastic weld

It worked a treat and the radiator was as new underneath

IMG_1347.jpegIMG_1348.jpeg

Bike scrubbed up like new , front cover was damage free and it was just road grime on it and the link pipe which easily cleaned off . Sprayed the engine with FS 365 to protect it

IMG_1349.jpeg
 
Here are the pictures (pre cleaning) of the plastic mesh I fitted to the inside of the stock guard and secured it with four spots of plastic weld

It worked a treat and the radiator was as new underneath

View attachment 443361View attachment 443362

Bike scrubbed up like new , front cover was damage free and it was just road grime on it and the link pipe which easily cleaned off . Sprayed the engine with FS 365 to protect it

View attachment 443363
I notice you have the unit garage’s stand extension. Did it fit ok or did you have to trim anything? I just returned one, couldn’t make it fit.
 
I notice you have the unit garage’s stand extension. Did it fit ok or did you have to trim anything? I just returned one, couldn’t make it fit.
Fitted no problem , I did have to file a little off the casting line at the very bottom of the foot but was a 2 minute job

I swapped the black hex socket flange head screws for BMW torx ones as well

IMG_1354.jpeg
 
I have a hepco & Becker side stand enlarger and rear carrier on order
Will report back when I receive them and they are fitted to bike
 
I was passing Bahnstormers yesterday so dropped in to look at a 12 G/S.

I thought it looked even better in the flesh, than in pictures. The ergonomics were spot on (for me) too.

The only slight surprise was when I asked where the pillion pegs were. Ah, they’re an extra sir… 😂

Other than that, for me it would be a really desirable bike. Please keep the owner experiences coming.
 


Back
Top Bottom