R1200gs rear shock bush required

[GeorgeM]

Help required , the lower mounting bolt sheared , to cut a long story short I cut through the shock lower bush and the remains of the bolt .
I can get the swing arm drilled out but realoem does not list the lower bush , it's a Esa unit 2010 , I have pushed the old one out does anybody have a source for a new bush.


Sent from my iPad using Tapatalk

 

[Bendy toy]

That bush has to be properly lubricated and probably needs washers to avoid the bolt getting bent back and forth.

Whoever is drilling out the sheared bolt should be more than capable of making a brass bush. Alternatively ask BMW.

 

[GeorgeM]

It's the rubber bush into the shock itself


Sent from my iPad using Tapatalk

 

[Bendy toy]

There must be something here to do the job

http://www.ebay.co.uk/sch/i.html?_f...otorcycle+shock+absorber+rubber+bush&_sacat=0