Radius Risers - Fitting

[Darkstar]

Just received a set of Radius Risers from NN (thanks norm!)

Is it right that they're only held onto the existing mounts by one bolt each side!?!

I may be being nieve but it feels like it needs two..

Thoughts?

Steve

 

[JINKY]

Dark i fitted them last week,just one bolt.Had to re-tap due to excess powdercoating.But they hold ok.

jinky

 

[Nice 'n' Fat]

There's two per side on the 06

 

[JINKY]

the new ones come with a stud and one bolt,but its ok once tightened

jinky

 

[Nice 'n' Fat]

I see said the blind man

http://www.nippynormans.com/prodinfo.asp?number=GRP-1208S&variation=&aitem=3&mitem=4

It looks like a nice bit of kit in the photo!

 

[wacits]

Radius riser

Yes, the riser has only one bold and a locating stud each. I fitted mine two weeks ago. Took 10 min once i realised that you needed a "star" socket instead of the normal hex.

Just remember you may have to loosen the cable tie on the clutch hose and electrics. Mine was a bit tight, but the brake & throttle cable was fine.

 

[Darkstar]

Thanks guys, all became clear when I started to loosen the fitted ones.

Have to say, they look the part and on the short test ride they feel pretty good too.

Time will tell if they compensate for my short stature

Cheers guys!

 

[Fenlander Strasse]

I was considering these or the US Rox risers (at around the same price by the time you pay taxes etc) with slightly more adjustability, and have gone with the Verholen ones as they just look right. Incidently - if you bought them direct from Germany they would cost you more.

Roxy fun

MV Verholen style

 

[claw]

I've been thinking about the Rox antivibration ones, wish i'd got them at the $2 pound.

The Radius ones look pretty good though.