Removal of ABS question.

[(RIP) willstatt]

Just bought some braided stainless brake hoses for my 2001 1150 from which I'm removing the abs. Hoses come in three sections. short piece from LH caliper to cross link (metal) pipe. Pipe with union that comes from RH caliper to other end of cross link and then pipe up towards bars. Then one final pipe that comes from lever/reservoir.

so I need some sort of 'link' or connector now do I?

Can someone knowledgable please give some guidance?

thanks

Will

 

[Number 6]

I think you need the distribution piece, part no. 34327650965 (plus bleed nipple and cap)

Part nos. 14, 15 and 16

 

[(RIP) willstatt]

Right, so looking at that drawing, what I need is a part where part no 14 is, but I don't need the outlet no. 15 because (I think) that goes to the abs pump? Is there an equivalent 'part 14' that just connects the two hoses?

Will

 

[(RIP) willstatt]

sorry no.6, jus read your post again, and I realise now that 'outlet 15' is the bleed nipple you're talking about.

Thanks for the help!

Will