Rider display unit clock

[A25WESTR]

I have recently aquired a late 2003 1150 Adventure which I am in the process of tidying at the moment.

My question is the clock in the drivers display unit only works when the ignition is on, which is a pain to reset all the time.

I am sure this is not normal and can only think that it has something to do with the Datatool3 alarm system that is fitted.

Fuse 3 is OK and there is power to the fuse.

Any pointers would be welcome.

Many thanks

 

[STUBBS]

start riding at midday or midnight

 

[Dom]

made me smile!

 

[mandon]

start riding at midday or midnight

it happened to me, the culprit was the battery .. i changed the battery and the problem was cured..

 

[(RIP) DitchWater]

Heard this one from a wise sage today: disconnect the battery for five to ten minutes and it should be fine then.

It's got something to do with resetting the Motronic.

 

[Steptoe]

Heard this one from a wise sage today: disconnect the battery for five to ten minutes and it should be fine then.

It's got something to do with resetting the Motronic.

Easier to pull fuse 5, does the same thing.

 

[(RIP) DitchWater]

Of course. Not so wise then.

 

[AndrewD]

Had this problem and it was the fuse (must be 5 I guess) blown, new fuse no problems!

 

[davegs]

Clock

This happend to me tried all known cures, nothing happend and then it suddenly started working again.
Dave GS