Rok Risers

[zoltan]

Any one has them on the GS LC ?
Like this one
http://youtu.be/xhOQvV69IKw

Any issues with the cables been to short or any other problems ?

 

[batman1]

I had these on my 2013 GS-LC, beautifully made fully CNC machined, I just managed to get away with fitting them without the need to change any cables etc. although I did remove a cable tie on one of the cables to give it a bit more slack where is ran past the headstock.

Nice product!

 

[Troppo]

Make sure ALL bolts are TIGHT.

 

[roundincircles]

Makes the brake cable tight but I have them on my GS WC. They suggest removing the tie under the tank which I did not do and it's just about OK.

 

[CPJS]

They make an enormous difference to comfort and control, get them!
The brake line issue depends if you want more height or to pull the bars back to the max.
More height you can get away with it.
Pulling the bars right back ( as I did) needs the brake line moving behind the 'Fork tube'. V. easy to do, take out the plastic plug on top of the 'fork tube' , undo the nut beneath, pull down the 'fork tube' move cable to behind it and re assemble. it takes longer to get the tools out than to do the job, don't be afraid, do it.

 

[zoltan]

They make an enormous difference to comfort and control, get them!
The brake line issue depends if you want more height or to pull the bars back to the max.
More height you can get away with it.
Pulling the bars right back ( as I did) needs the brake line moving behind the 'Fork tube'. V. easy to do, take out the plastic plug on top of the 'fork tube' , undo the nut beneath, pull down the 'fork tube' move cable to behind it and re assemble. it takes longer to get the tools out than to do the job, don't be afraid, do it.

Thanks chaps

 

[kurienp]

They make an enormous difference to comfort and control, get them!
The brake line issue depends if you want more height or to pull the bars back to the max.
More height you can get away with it.
Pulling the bars right back ( as I did) needs the brake line moving behind the 'Fork tube'. V. easy to do, take out the plastic plug on top of the 'fork tube' , undo the nut beneath, pull down the 'fork tube' move cable to behind it and re assemble. it takes longer to get the tools out than to do the job, don't be afraid, do it.

CPJS, could you post some pics please? much appreciated.

I have the wunderlich up and back risers. Currently all is well but want to move the handlebar further back and that will stretch the brake lines.

Thanks
K

 

[Grim Reaper]

Does anyone make a kit for the GSA that has longer lines for the front to accommodate risers?

 

[CPJS]

kurienp,
I would love to be able to post some pics, but cannot work this site out. my attention span is short and I get annoyed easily, as Holmer Simpson said 'trying is the first step to failure'. There are quite a few who have done this mod maybe one of them could help out.

 

[JimVonBaden]

I installed them on a friend's bike, and a second friend's bike. Simple install, drop the brake line and switch wires under the fork tube and zip-tie to the side of the fairing.

Some find they do not need to do this.