Screen removal

[NorthernBoy]

I wantto fit my cockpit surround, but can't see how to remove the screen. I can undo the front attachment OK, buy the black adjusters that you unscrew, well, they seem to unscrew toa stop, and then not want to go any further.

I don't want to break anything, so do I just turn these harder, or am I missing something?

Thanks.

 

[PJ1200]

If its on a 1200, fully loosen the rear adjusters. use a 10mm spanner to undo each round headed retaining nut on the inside of the screen mounting bracket. Remove the knurled adjuster bolt and round head nut and make sure you catch the other nut that fits into the inside slot of the metal mounting bracket. The front is just the 2 T25 torx screws to undo.

Hope this helps.

Any probs give us a ring on 07917 667398

 

[NorthernBoy]

That's excellent, thanks, should do the trick. I'll get it fitted this afternoon now.