Sena SM10 with bmw bluetooth and Zumo 660 problem

[Karlread]

I hope someone has come across this issue and resolved it. I have a Sena SM10 which I have tried to set up so I get the RT radio via Bluetooth and the directions from the Garmin.
I can only pair the radio with the SM10, the Garmin sees the SM10 headset in nearby Bluetooth items but will not connect.
Anyone resolved this or know of a link to where I can find the answer to resolve it.

Thanks

Karl

 

[busy builder]

With my Scala Q3 I just paired the audio, the 660 works just fine albeit without the wheel.

 

[Lonterra]

I've got my SMH10 paired with the RT, Zumo 660 and my Galaxy S4.

First, it might be worthwhile getting the latests firware (5.1) if you haven't already.

You need to make sure you clear all the pairings first before starting.

Pair the RT first as a Mobile Phone pairing.

Then you must pair the Garmin as a Multipoint Pairing.

The other thing to check is that the Garmin is set to pair to the Sena as a Audio connection, not a Phone connection. If you try to connect as a phone connection it won't work. (Tools, Settings, Bluetooth, Audio).

You can download a pdf of the user manual here:

http://www.sena.com/support/documents/?cat=users-guide&productname=smh10

Page 43 (Case 6) is the relevant setup you need.

 

[Karlread]

Can't see the relevance of a Scala, but a big, big thank you to Lonterra. The software update from v4.1.1 to V5.1 did the trick as well as telling the Garmin there was an updated SM10 from the old version it had logged.
Lonterra, I owe you much gratitude and a very large tankard of Ale.

 

[Lonterra]

No problem