show us your bits

[happy pilgrim]

right now that i have your attention, i am intending to fit starcom unit, auxillary fuse panel,gps leads, plus heated jacket leads under the gs seat. how do you do it without it all looking like a complete lash up!!!!, on my last bike had similar fitted but evrytime i removed the seat it was just like a blackbirds nest help please, pictures would be great help,thanks

 

[Daithi]

Wiring

Hi Happy,
I ran two cables with an inline fuse on the +ve to a 30x50x80 plactic
enclosure onto which i fitted 3v 6v Regulators to power the camera(3v)
and the intercom (6v) which placed underneath the fuse/relay tray.
I got push-in power connectors in Maplins so it can be reduced to one
lead and the enclosure in 5 mins. I will take some snaps tonight, it worked
out well and I ended uo with a spare auxilliary socket out of it as well, I drilled a 20mm hole in the box below the relays.
Even thought of fitting a small compressor where the abs controller should be
but thats another days work.
Daithi.

 

[jimbo]

you did ask

 

[happy pilgrim]

most amusing