Stubby exhaust 1150GS - apologies in advance...

[Chap in Cheshire]

Hallo all. I have Googled stubby exhausts and there is mention of a chap named Bryn. Even an ebay link of old that doesn't work.

Can anyone help me find a stubby for 2000 MY 1150GS?

Regards,

Christian.

 

[drinu64]

Look up dominator exhausts... they are polish and still relatively cheap

Sent from my GT-I9301I using Tapatalk

 

[Fanum]

I'm pretty sure Brynn doesn't do stubbies anymore, mostly because since then, he's had 4675 different bikes.

Do a search though and you'll find how to get one from ebay for under 15 quid

 

[buellzebub]

I HAVEN'T tried one but apparently this is the one, eBay item no. 320504868961

 

[Chap in Cheshire]

Thank you very much people, fastest replies ever. Regards.

 

[Fanum]

I HAVEN'T tried one but apparently this is the one, eBay item no. 320504868961

Right item, wrong size (I think)

I believe the I-D of the pipe needs to be 54mm

 

[buellzebub]

45mm on a 2000 single spark with standard cat

 

[Chap in Cheshire]

Got it. Rubber mallet, on it goes. Techno-Luddite, but in fairness I do try. Changed pads front and rear, took me two days - lots of corrosion mind. End can must be easy.

 

[Fanum]

45mm on a 2000 single spark with standard cat

Interesting.....I couldn't find my calipers so I squished a bit of paper over the inlet end of the OEM silencer I have on my kitchen table then stuck it up against the rule on my leatherman (yep, real acurate high-tech here tonight ) and it's definitely around the 54mm mark on mine...twin spark '04 GSA

I've posted a few times about stubbies, which is why I had it in my head initially that the 45mm wasn't right

It would seem that the OP should go measure his own pipe (fnaaar fnaaaar) to make sure

 

[Chap in Cheshire]

I'm going to use my thumb, forefinger and a builder's tape measure. If is too small, I will use a bigger mallet.

 

[codcutter]

It could be this one
http://www.ebay.co.uk/itm/321226955...49&var=510167851767&ssPageName=STRK:MEBIDX:IT

 

[Chap in Cheshire]

That is the one - thanks everyone.

 

[Demongroover]

eBay £9


Sent from my iPad using Tapatalk

 

[newboy]

I should get one and then I could have 2x big panniers??

 

[gothbiker]

This is what I've fitted


Sent from my iPad using Tapatalk

 

[Grizzly]

Yep, a stubby makes a difference - especially if touring 2-up or camping
The two FULL SIZE cases makes a big difference - plus you don't need to worry about melting the back of the case
I used to swop back to my Remus end can between big trips for a more "normal" look but sometimes I don't bother now.

Cheers................Grizzly

 

[Demongroover]

I fitted the stubby purely so I could fit the larger left system pannier.
It works with the cat in place but I advise against a stubby and a y-pipe; too loud and it'll increase exhaust valve temperature.
I have the same on my Rockster and my GSA.
It's not much louder than standard tbh.


Sent from my iPhone using Tapatalk

 

[Udders]

Yep, a stubby makes a difference - especially if touring 2-up or camping
The two FULL SIZE cases makes a big difference - plus you don't need to worry about melting the back of the case
I used to swop back to my Remus end can between big trips for a more "normal" look but sometimes I don't bother now.

Cheers................Grizzly

Oooh.... didn't realise you could do the full size pannier thing! I've had a stubby for ages but only put it on for a short while then took it off again. Which model bike does the bigger pannier come off then?

 

[Grizzly]

I think the panniers from 1100/1150RT or 1100/1150RS or 1100S and possibly a few more
You could also just buy a BASE for the larger LH case then transfer over your lid and lock/handle mechanism?

Cheers....................Grizzly

 

[buellzebub]

This is what I've fitted


Sent from my iPad using Tapatalk

I may be wrong but that looks like all the hot exhaust gasses are going to exit right next to your pannier, possibly melting anything on that side??

On the one below, the exhaust outlet is well below and clear of the pannier.

eBay £9


Sent from my iPad using Tapatalk

Mine with pannier fitted. You've got to keep the exit well away from the pannier.