robb
Registered user
Does anyone know if it is possible to switch the headlight off. I'm doing the HRT trackday at Cadwell and they require you to run without headlights.
cheers...Rob
cheers...Rob
Switching off the headlight
- Thread starter robb
- Start date
nadeem
Guest
Nicked from Mouse's post in teh 1200 FAQ section...
How to turn off the dipped headlight - or rather cause it not to turn on in the first place.
Turn on ignition
Hold down indicator cancel button for 5 seconds
Hold down right indicator button for 5 seconds
Start engine
How to turn off the dipped headlight - or rather cause it not to turn on in the first place.
Turn on ignition
Hold down indicator cancel button for 5 seconds
Hold down right indicator button for 5 seconds
Start engine
robb
Registered user
ta la - I'll give that a trynadeem said:
This can be done with the engine running as well, but only while the bike is stationary. It will leave the pilot light on and the rear light on too.
could you just pull out a fuse? or disconnect the bulbs.?
not really
as the 1200 does not have any fuses!!
As to undoing the bulbs, most would think that wasn't too practical!
Anyway- as you turn off the ignition, the system resets and dippped beam returns on next ignition.
Keith Chapman said:
as the 1200 does not have any fuses!!
As to undoing the bulbs, most would think that wasn't too practical!
Anyway- as you turn off the ignition, the system resets and dippped beam returns on next ignition.
robb
Registered user
nadeem said:
Worked a treat both with and without the engine running. Do I have to switch the ignition off and on to restore them or is there another sequence to put them back on??
nadeem
Guest
Robb
just switch off ignition completely and then restart - will go back to normal...
just switch off ignition completely and then restart - will go back to normal...
Similar threads
