Hi - would like to change the Euro spec headlight on my PD for a UK spec one. Anyone got one cluttering up the garage they would sell?
Like this one:
Cheers
Paul
Like this one:
Cheers
Paul
Wanted UK Spec Headlight for R100GS / PD
- Thread starter Paul S
- Start date
- Joined
- Jul 14, 2010
- Messages
- 10,367
- Reaction score
- 3,593
Believe it’s the same lamp as a funduro,
Double check but ,that will widen the search if correct
Double check but ,that will widen the search if correct
Gerry just swapped his for a twin headlight unit. Might be worth dropping him a pm.
I think certain K75 models had same headlamp, too.
.......already chatted to Gerry - it's a Euro one as well.
If nothing comes up here will see what Motorworks have in stock.
I am sure you have already seen this Paul.
Part number for GB headlamp.
Part number for GB headlamp.
Gone for a 1995 F650 Funduro one off Ebay for £30. Has the same part number and so will hopefully fit.
Thanks all for your suggestions
Thanks all for your suggestions
I had a nightmare getting the visor off my euro light to put on the UK light, tried heat which got it off but in the end just ordered a new one as it never looked right once it was off. Still available from BMW.
Finally got round to looking at swapping my euro headlight for the second hand UK spec one I had sourced off a Funduro.
As expected it is a straight swap although a fair amount of work involved to get at the old headlight and swap over the different parts. Found it very fidddly to get the headlight off the support frame and right at the end the plastic spigot/ball joint snapped off the frame
Bit of very careful drilling and using a spare cut down metal spigot sorted it out
Good news is that I managed to remove the visor off the old headlight without damaging it and so will silicone glue it on the new headlight tomorrow.
Then just need to put the bike back together again
As expected it is a straight swap although a fair amount of work involved to get at the old headlight and swap over the different parts. Found it very fidddly to get the headlight off the support frame and right at the end the plastic spigot/ball joint snapped off the frame
Bit of very careful drilling and using a spare cut down metal spigot sorted it out
Good news is that I managed to remove the visor off the old headlight without damaging it and so will silicone glue it on the new headlight tomorrow.
Then just need to put the bike back together again
Finally got round to looking at swapping my euro headlight for the second hand UK spec one I had sourced off a Funduro.
As expected it is a straight swap although a fair amount of work involved to get at the old headlight and swap over the different parts. Found it very fidddly to get the headlight off the support frame and right at the end the plastic spigot/ball joint snapped off the frame
View attachment 471471
Bit of very careful drilling and using a spare cut down metal spigot sorted it out
View attachment 471472
View attachment 471474
View attachment 471475
Good news is that I managed to remove the visor off the old headlight without damaging it and so will silicone glue it on the new headlight tomorrow.
View attachment 471476
Then just need to put the bike back together again
View attachment 471478
Good job mate, taking the headlight out is a painful job.
Sent from my iPhone using Tapatalk
Check all the warning lights work as you go, otherwise its all got to come off again (I know).
