Water removal question?

snerkler

Registered user
Joined
Feb 3, 2010
Messages
1,851
Reaction score
149
Location
Derbyshire
I've just given my new GSA its first clean, and found that water collects in the fins/grills/ducts or whatever they're called of the cylinder heads. I tried twisting the end of the leather to get at the water but wasn't very successful. Does anyone know A good way to remove it? I want to spray the bike with Scottoiler fs365 and can't while there's pools of water on the cylinder heads, plus I wouldn't want it to freeze overnight :-/
 
leaf-blower.jpg

I'm not taking the piss, guy near me uses one to dry his Harley :ymca

I don't clean mine :thumb
 
Hi, I use a shringe with a piece of pipe attached. Push pipe into fins suck out water, run bike for 5 mins this then burns away rest of water, job done. I know shouldn't idle bike but I've done this with all my GS' without problem. Shringes available on E-bay !

ORCA:thumb
 
Just ride the thing - the water will evaporate with the heat.
 
Yeah, like Mr McaFarlane I was thinking along the lines of some sort of compressed air. Failing that Snerkler, I think you should get out a drinking straw..... (you are clearly obsessed about cleaning your new bike ..... which, to be fair, I understand .... :D)
 
The jollup used comes from BuMW. :thumb2 Before you ask..... You can get it from a dealer's, possibly the same one you bought your bike from, with luck. ;)

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/6yFUtJhUb7Q&hl=en_GB&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/6yFUtJhUb7Q&hl=en_GB&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>
 
+2 on the petrol garden leaf blower. Mine is a 150 mph hair dryer for the bike.

However to get financial concurrence for a purchase like this, it is vital to tell SHMBO that it is essential to keep the garden nice and tidy. Drying the bike is simplyanother use you think of after the purchase :comfort
 
Wolf-Air compressor,£99.99,Daily Telegraph Motoring supplement most Saturdays.
 
Is this a serious question or just a ploy to get people to admit they crap themselves over water collecting of their engine???

FFS its supposed to be a ruffty tuffty adventure bike not a tarts handbag!
 
I've just given my new GSA its first clean, and found that water collects in the fins/grills/ducts or whatever they're called of the cylinder heads. I tried twisting the end of the leather to get at the water but wasn't very successful. Does anyone know A good way to remove it? I want to spray the bike with Scottoiler fs365 and can't while there's pools of water on the cylinder heads, plus I wouldn't want it to freeze overnight :-/

I've just hosed mine down after its first 200 mile run today, then sprayed Scottoiler all over....Don't worry, it won't hurt, a little bit of water can't stop a Panzerkampfwagen Mark12!!!

:ronno:mcgun
 
Try these, work a treat :augie
 

Attachments

  • base_media.jpg
    base_media.jpg
    1.7 KB · Views: 373
I've just given my new GSA its first clean, and found that water collects in the fins/grills/ducts or whatever they're called of the cylinder heads. I tried twisting the end of the leather to get at the water but wasn't very successful. Does anyone know A good way to remove it? I want to spray the bike with Scottoiler fs365 and can't while there's pools of water on the cylinder heads, plus I wouldn't want it to freeze overnight :-/

Garden leaf blower, £29,99p from Aldi:augie
 
Leaf blower for me too....saves time in the washing, to waxing, stages. :thumb2
 
A little bit of water won't do any harm
We took a new GSA for a good wash today
804619246_iRgw5-X2.jpg
 


Back
Top Bottom