Wheel bearing sizes 690 enduro r

steadysteve

Well-known member
UKGSer Subscriber
Joined
Feb 26, 2012
Messages
2,961
Reaction score
302
Location
Lincolnshire
Can anyone confirm if the rear wheel bearing sizes are the same for all the generations of 690 enduro?
It’s a 2019 bike 690 enduro r.
I’m trying to source a spare set but some listings on eBay say they fit 2009-2018, some say 2009-2023, some say only up to 2018 and others say 2020 onwards.

Anyone got a definitive answer plz?
Thanks
 
Can anyone confirm if the rear wheel bearing sizes are the same for all the generations of 690 enduro?
It’s a 2019 bike 690 enduro r.
I’m trying to source a spare set but some listings on eBay say they fit 2009-2018, some say 2009-2023, some say only up to 2018 and others say 2020 onwards.

Anyone got a definitive answer plz?
Thanks
Looks like 6205-2RS for both rear wheel bearings

6006 for sprocket carrier cush drive

All here, on Fowlers website

KTM do a complete rear wheel repair kit for £55

Don't bother with 'All Balls' off ebay, go Genuine KTM from Redline :JB
 
Rear wheel. I’ll investigate further.
Some of the eBay listings show quality bearings at sensible prices so I was hoping an earlier/later year bearing would fit. It’s only to carry as a spare set.
Cheers


Thanks for the replies.
 
All their bearings are the same size across their enduro bikes. F&R.
Old boys trick - the output shaft dust seal is metal.
It’s also the same size as the wheel one.
You can thank me later.
 
This list might be useful to some folk on here.
I looked at a set of decent quality bearings on eBay but the listing said they only fit 2008-2018 which seemed at odds with other listings that say their bearings are for 2008-2023 models.
The seller confirmed they will fit my 2019 690 enduro r bike and sent the list of others using the same bearings.
 

Attachments

  • IMG_4788.png
    IMG_4788.png
    203.4 KB · Views: 5
  • IMG_4789.jpeg
    IMG_4789.jpeg
    65.6 KB · Views: 6
Most likely, the rear wheel bearings from 2009 to 2023 are interchangeable with minimal differences. However, since the 2019-2023 models do have subtle design revisions, you should verify the sizes for the exact year or cross-reference with the OEM part numbers for the 2019 KTM 690 Enduro R.
 
Most likely, the rear wheel bearings kit from 2009 to 2023 are interchangeable with minimal differences. However, since the 2019-2023 models do have subtle design revisions, you should verify the sizes for the exact year or cross-reference with the OEM part numbers for the 2019 KTM 690 Enduro R.
The rear wheel bearings from 2009 to 2023 are likely interchangeable with minimal differences, but it's important to be cautious due to the design revisions in the 2019-2023 models. These subtle updates may result in slight changes in bearing dimensions or mounting features.
 
I sell KTM wheel bearings on eBay.

If I’m honest, I just can’t be bothered to continually check if they fit later years, so I only list the years that I know they will fit.

PS ‘2RS’ means that the bearing has rubber seals each side - it’s nothing to do with the size of the bearing.
 


Back
Top Bottom