For Sale Workshop Clearout - Part Deux

[Stephen H]

More stuff that I’m sick of tripping over, prices are posted.

Axcaliber PTFE coated saws, one 11tpi and one 7tpi (fine and rough cut). Proper bits of kit that retail for £17 each. £15



Clarke ET110 6” machinist steel square. £10



No Nonsense heavy duty sealant applicator gun. £12



Blue Spot professional punch set. £10



Selection of T bars, nut runners and TX/allen screwdrivers. £15
Including:
- Wiha 7mm t bar nut runner
- Whitehall 4mm and 5mm t bars
- No name 3mm and 4mm t bars
- JessEm TX25 screwdriver
- Inbus 5mm t bar
- Elkind 3mm ball end Allen driver
- No name 5mm ball end Allen driver
- Wera 4.5mm t bar



Fast cap Flush cut trimmers, have some knocks that would sharpen out. £10



UJK adjustable bench clamp. £13



Lots of ball ended Allen keys from 10mm down to 1.5mm, all decent CRV with the silver ones either Swiss Tool or from a Halfords set. There’s a full set of long ball enders in the yellow pack. Will sweeten the deal with a JessEm TX25 driver and an Elkins 3mm ball end driver. £15



Ridgid 65S pipe cutter (6 to 65mm). Blade is spot on. £40



Roughneck gorilla gripper for lifting boards on your own. Amazing bit of kit that I never used so it’s like new bar being in my toolbox. Cost me £70. £40



Brand new Wera joker spanner roll. £10



Magnusson files, all of them £14

 

[Deleted account 260111001]

Can I have the UJK clamp please, also if the spanner’s are in the roll I’ll have them please,

 

[steadysteve]

Punch set for me please Stephen.

 

[Stephen H]

Punch set, sealant gun, UJK clamp all sold

 

[magno]

Can I have the wera spanner roll please

 

[digga]

Can I have the UJK clamp please, also if the spanner’s are in the roll I’ll have them please,

at that price there's no spanners in there

 

[Deleted account 260111001]

at that price there's no spanners in there

worth a punt though

 

[magno]

I´ll let you know when it arrives.

 

[Stephen H]

Punch set, sealant gun, UJK clamp and the EMPTY Wera roll all sold

 

[GedJack]

Allen keys please. Pm sent

 

[Stephen H]

Allen keys sold

 

[Stephen H]

Open to offers on the leftovers

 

[Stephen H]

Left overs with some update prices:

Axcaliber PTFE coated saws, one 11tpi and one 7tpi (fine and rough cut). Proper bits of kit that retail for £17 each. £14



Clarke ET110 6” machinist steel square. £9



Selection of T bars, nut runners and TX/allen screwdrivers. £14
Including:
- Wiha 7mm t bar nut runner
- Whitehall 4mm and 5mm t bars
- No name 3mm and 4mm t bars
- JessEm TX25 screwdriver
- Inbus 5mm t bar
- Elkind 3mm ball end Allen driver
- No name 5mm ball end Allen driver
- Wera 4.5mm t bar



Roughneck gorilla gripper for lifting boards on your own. Amazing bit of kit that I never used so it’s like new bar being in my toolbox. Cost me £70. £35



Magnusson files, all of them £13