I see sarcasm isn't your strong point.
1150gs sat nav mounting point ?
- Thread starter DR268
- Start date
I see sarcasm isn't your strong point.
I made my own years ago, and it works well - perfect position
Cheers................Grizzly
bought a used sat nav from the for sale section and copied your design, sits in the eyeline well
2mm mild steel plate and stainless bolts
thanks
Attachments
googled the speedo drive, I wasnt aware there was an easy fix for the over enthusiastic speedo.
I see motorworks sell used ones.
appears mine is 3.0 : 1
seems there is a 2.875:1 drive for an 18 inch spoked wheel which I think is 4.3% ratio difference and pretty close to correcting my over read
or is it the 2.6:1 for the 17" wheel listed for the RT1150. would it not read slow ?
or are my calculations wrong ?
I would like to fix it
thanks for the info
From memory I think it was the 2.6 but if you speak to Motorworks they are very knowledgable and will probably steer you straight.
cheers
I will give them a ring after I get the bike out and see exactly what the speedo is reading compared to the sat nav to see what I need to correct.
Just fitted an SW Motech mount (bought used on here last year) for my Zumo 390LM on the top of the lower part of my MRA screen... probly gonna wobble so I'll fit stays (where I've drawn the red lines) to address that.
I love the high line-of-sight position - a bit higher than my Migsel mount...
I love the high line-of-sight position - a bit higher than my Migsel mount...
Why not just use a longer ram arm on the Migsel mount 
So I can confuse folk.
Similar threads
