Wardy Active member UKGSer Subscriber Joined Oct 8, 2016 Messages 255 Reaction score 2 Location France Nov 27, 2020 #1 Hi guys, sorry to be a pain, but anyone got the torque settings and procedure for tightening headstock bearings? Cheers Steve.
Hi guys, sorry to be a pain, but anyone got the torque settings and procedure for tightening headstock bearings? Cheers Steve.
nicholsonj2252 Well-known member UKGSer Subscriber Joined Oct 19, 2014 Messages 1,293 Reaction score 75 Location County Durham Nov 27, 2020 #2 Here you go Steve :
Wardy Active member UKGSer Subscriber Joined Oct 8, 2016 Messages 255 Reaction score 2 Location France Nov 27, 2020 #3 Cheers John....was having a senior moment. Many thanks Steve
Wardy Active member UKGSer Subscriber Joined Oct 8, 2016 Messages 255 Reaction score 2 Location France Nov 27, 2020 #4 Sorted, re torqued the headstock this evening so will give the x a run out tomoz. Big thanks once again John cheers
Sorted, re torqued the headstock this evening so will give the x a run out tomoz. Big thanks once again John cheers
Wardy Active member UKGSer Subscriber Joined Oct 8, 2016 Messages 255 Reaction score 2 Location France Nov 29, 2020 #5 Quick update...certainly rides and turns better, but using mitas 644 upfront so does tend to wander on the road. Great offroad and inspires confidence...let's hope not to much
Quick update...certainly rides and turns better, but using mitas 644 upfront so does tend to wander on the road. Great offroad and inspires confidence...let's hope not to much