Bigtwin
Guest
just 2 nuts, unhook the cables and undo the banjo. but you dont have to remove it to clean it, just stuff a rag in the venturi and remove the tops to clean.
Cheers. Did take it all off - found the chamber full of white sludge, and the jets cacked in hard white powder. Cleaned it all out, still no running. Complete strip - still no running. Phaff phaff phaff about 4 times.
Eventually found a tiny hole from the bottom of the bowl into one of the jet chambers bloked by the same white reisdue - had to try a load of dressmaking pins till I found one thin enough to do the job, then bend and handle it with some long-nose pliers to get it in there and clear the blockage.
Put it back together and WHAM! Started even before I got 1/2 way down the kick! What a great feeling that it.
Purrs a treat. Took it for a spin on the back road (naughty I know) and everthing works - lights, brakes the works. So off for an MOT next Sat I think.
Only fault is that the starter motor doesn do anything - connect a battery and nowt happens at all. Checked the (one!) fuse and all is fine so mystery. Quite happy not to have elec start and a battery though - waste of weight and money so long as she starts on the level fine.
Pics later on when the sun's out proper.
)