cockneyjanner
Guest
Hi All,
On my 100 mile journey home from Portsmouth this evening my K1200RS had a problem with the brake system (servo assisted with ABS). This problem occured twice, and fortunately both times were at very low speed and almost coming to a stop.
The servo seemed to fail and I was left with the residual brake pressure only, which required a significant pull on the lever. The "brake failure" light was on both times. The problem was cured by switching the ignition off, and then re-starting the bike. After re-setting the self test worked perfectly and the brakes seemed to function as normal.
Any advice will be very gratefully received
On my 100 mile journey home from Portsmouth this evening my K1200RS had a problem with the brake system (servo assisted with ABS). This problem occured twice, and fortunately both times were at very low speed and almost coming to a stop.
The servo seemed to fail and I was left with the residual brake pressure only, which required a significant pull on the lever. The "brake failure" light was on both times. The problem was cured by switching the ignition off, and then re-starting the bike. After re-setting the self test worked perfectly and the brakes seemed to function as normal.
Any advice will be very gratefully received
