Annoying ticking cylinder

[kafri77]

Hi


The right cylinder on my GS Basic is ticking.
I adjusted the valve clearance and rocker arms end float.

Still ticking...

what else can be the reason??
can a lightly worn push rod tip make this noise?

thanks

Nir

 

[Kenny]

Could well be the actual rocker shaft needle roller bearings showing signs of wear

 

[(RIP) pastyman]

This could be serious.. You should WATCH this carefully, It might be TIME to CLOCK off.
Now if you could get the other side to do a tocking noise it could be very interesting to hear you comming down the road
They always say that these old airheads run like clockwork,

 

[Kenny]

This could be serious.. You should WATCH this carefully, It might be TIME to CLOCK off.
Now if you could get the other side to do a tocking noise it could be very interesting to hear you comming down the road
They always say that these old airheads run like clockwork,

Dear Sir, A polite warning that your jokes are being monitored by the moderator...anymore more of them and you may well be forced to ride a pink bike around the roads of Devon next June !!

 

[kafri77]

images of push rod and rocker arm

I rechecked the push rod and rocker arm and found signs on them,
does the indicate something?

 

[Rob Farmer]

It looks like the inner pushrod guide in the heads have lifted a little to catch the pushrods like that. You should be able to knock them in again if you have a pushrod tube drift.

 

[mikyh]

Pitted rocker arm faces

Are the usual cause for ticking in the heads, like misadjusted valves do. It's not that grave. Unfortunately you can't grind it down, as the face of the rocker is surface (was ) hardened, and grinding it will help for 10 minutes only.
From experience.

Miky, also from the Holyland

 

[(RIP) pastyman]

Dear Sir, A polite warning that your jokes are being monitored by the moderator...anymore more of them and you may well be forced to ride a pink bike around the roads of Devon next June !!

OH NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO. Please not that sir,

 

[fayeslane]

Dear Sir, A polite warning that your jokes are being monitored by the moderator...anymore more of them and you may well be forced to ride a pink bike around the roads of Devon next June !!

In a matching tutu

 

[Redboots]

In a matching tutu

Cheech Martin eat your heart out

 

[ole.mansfeld]

Hey Kafri77 did you ever find a solution?

Sendt fra min SM-G935F med Tapatalk

 

[Kenny]

It's only been 5 years, give the guy a chance !

 

[solidstate100]

Epic thread revival!

And welcome to ole.mansfield

 

[ole.mansfeld]

Thanks

Sendt fra min SM-G935F med Tapatalk

 

[ole.mansfeld]

Solved mine by retourqing the cylinder heads. The rocking arm guides was loose..

Sendt fra min SM-G935F med Tapatalk