Are they quickly detachable?

[rovert57]

So are these devices quickly detachable like an ordinary sat nav .

=====

Fresh thread started.

Richard

 

[LockieP]

I have a Chigee AO5 on my RT that is in a BMW sat nav mount so detaches in the usual way-key, slide the lock open & push the button to release.

 

[Redboots]

I made my Carpuride QD by using the Garmin XT mount for power, with an adapter.

 

[Barnoe]

My Carpuride click onto the BMW cradle in the same way my Nav6 does.

Locks on and use key to unlock slide lock and pop off, brilliant.

 

[SBD]

Most things are QD given an angle grinder…

 

[rovert57]

I was enquiring as I have a zumo xt mount so would these just fit onto that .

 

[Redboots]

I was enquiring as I have a zumo xt mount so would these just fit onto that .

No.
There is a guy on Ebay selling Carpiride-XT2 adapters (Seller name= weird3dprintsshop
Different pin-out between Xt and XT2 but its not hard to re-drill the contacts to line up with the XT mount.

I have a zip file if you want the instructions. PM me an email address. Its only 33,672kb. It contains a txt file, photos and the .f3d and .stl files if you know someone with a 3d printer.

Alternatively, try: Thingiverse

 

[rovert57]

No.
There is a guy on Ebay selling Carpiride-XT2 adapters (Seller name= weird3dprintsshop
Different pin-out between Xt and XT2 but its not hard to re-drill the contacts to line up with the XT mount.

I have a zip file if you want the instructions. PM me an email address. Its only 33,672kb. It contains a txt file, photos and the .f3d and .stl files if you know someone with a 3d printer.

Alternatively, try: Thingiverse

Thanks for that offer ,sounds a bit too complicated to adapt .if I get one I’ll mount it on a ram mount .