Best Emergency Puncture Repair Kit

[rossi46]

I've just ordered the Touratech tool box and slime pump from NN and want a puncture repair kit to put in it. I've read good reviews on the Thumbs Up and Sealey kit but thought I'd seek some opinions on here.
Any recommendations ?

 

[hairysteve]

Stop and Go tyre plugger... look on e-bay, brilliant bit of kit. Got me out of the shit with a puncture on M1 last year.

 

[david a hall]

I use rat tails.... Could not be quicker, easier, cheaper or more reliable.

 

[stever1]

Don't use slime if you have tyre pressure monitoring on the bike. Its not allowed

 

[rossi46]

Don't use slime if you have tyre pressure monitoring on the bike. Its not allowed

I'm not using slime, it's a 12v air pump from NN which is made by slime

 

[rossi46]

Stop and Go tyre plugger... look on e-bay, brilliant bit of kit. Got me out of the shit with a puncture on M1 last year.

Just watch a couple of YouTube videos of the stop n go tyre plugger, is it really that easy to use ?

 

[Roadrash Rider]

+1 for stop n go, plenty of threads on here about this


Sent from my iPad using Tapatalk

 

[Gargy]

+1 for tyre plugger.

 

[mcinlb]

Used 'Stop n Go' twice(on different bikes) works well and very easy, no messing about, takes longer to pump up the tyre than to plug it.

BUT only good for nails / screws etc, won't fix a cut, carry some rat tails as well.

 

[Bryn]

Stop n go...worked a treat last time I got a puncture....new kit...not used one before that...followed the instructions and after using my compressor I was back on the road in 20 mins....
When the tyre came off a few thousand miles later...the repair looked very professional from the inside

 

[rossi46]

Stop n go it is then, order placed on eBay.
Thanks everyone

 

[hughguzzi]

I know youv'e ordered a stop and go now - but I swear by the Safety Seal rats tails !

 

[UpgradeAl]

I carry "craftyplugger" (http://craftyplugger.com) - plus a "stop n go" mini compressor. Dead easy and quick (just sit back and have a cig while the compressor is doing its biz)

 

[ATG]

Look for DYNAPLUG on Google. Its just brilliant !

 

[trancey]

Does the Slime pump run OK from the Canbus? I have a cheap 12v pump and it won't run off the bike.

 

[UpgradeAl]

Does the Slime pump run OK from the Canbus? I have a cheap 12v pump and it won't run off the bike.

The problem is that if you have a compressor that it too powerful, the Canbus doesn't like it and cuts the power supply. You need one that is "low and slow" like my Stop n Go mini compressor.

 

[Mozz]

The problem is that if you have a compressor that it too powerful, the Canbus doesn't like it and cuts the power supply. You need one that is "low and slow" like my Stop n Go mini compressor.

Not if you connect straight to the battery. I have a motopressor from rocky creek http://www.rockycreekdesigns.eu/tyre-accessories/motopressor-tyre-pump.html It comes with an SAE connection so I just plug it into the female SAE already connected to my battery which is usually used to plug the optimate into

 

[UpgradeAl]

Not if you connect straight to the battery. I have a motopressor from rocky creek http://www.rockycreekdesigns.eu/tyre-accessories/motopressor-tyre-pump.html It comes with an SAE connection so I just plug it into the female SAE already connected to my battery which is usually used to plug the optimate into

Ok, but why not spend a couple of pounds to get a Triumph/Hella plug and go straight from the accessory socket. Less hassle.

 

[Mozz]

Ok, but why not spend a couple of pounds to get a Triumph/Hella plug and go straight from the accessory socket. Less hassle.

Because its no problem atall me plugging straight into the SAE connection that's already there. Plus I CAN use a more powerful compressor

 

[WindyChuffer]

Stop n Go.

My rear tyre has 3 stop n go plugs in it. Tight as a tight thing.