Deleted account 191119001
Registered user
- Joined
- Aug 13, 2017
- Messages
- 12,798
- Reaction score
- 9
Can putting non BMW oil in the engine cause corrosion 


Can putting non BMW oil in the engine cause corrosion![]()
At 20 years, most dealer mechanics would have completed a 3 year apprenticeship and have an NVQ4 or 5 level qualification
Halfords and unipart do a 5-40w oil, just as good or no?
At 20 years, most dealer mechanics would have completed a 3 year apprenticeship and have an NVQ4 or 5 level qualification
At 20 I was shell changing accident damaged cars, I think a dealer trained mechanic can change oil

I'd be very surprised if there isn't a very good reason BMW specify 5W-40 rather than 10W-40.
Given the millions they put into R&D if they say 5W-40 then so be it, but I reckon it is all about the thickness of the oil.
It's all bollox
Back in the day BMW recommended 10/40 in the oilhead boxer - any good 10/40
Then BMW teamed up with Castrol & it went to 20/50 all of a sudden
Now they say 15/50 now they changed to Advantec via Shell
Do you think they changed from 10/40 originally to 15/50 for your benefit or theirs?

It's all those worn-out engines with huge great clearances that prompted the move to 15W-50. Stop them rattling themselves to bits.
Probably...
Ive always put 15/50 in all my Bikes but just let it tickover for a minute or so ..if i Rode in winter i probably wouldn't, 5/40 oil does seem piss thin, i think BMW chase the best deal because there's a lot of money to be had selling Oil specifically for your model of Bike and most folk fall for it![]()
This oil meets and exceeds the specifications set by BMW and is by a long way the most effective at reducing engine noise and improving the gear change. This is my experience and I have tried many if not all the oils that meet the spec and grade.
https://www.motul.com/gb/en/products/7100-4t-5w40
This oil meets and exceeds the specifications set by BMW and is by a long way the most effective at reducing engine noise and improving the gear change. This is my experience and I have tried many if not all the oils that meet the spec and grade.
https://www.motul.com/gb/en/products/7100-4t-5w40
