brake and clutch cap screws measurements

bim3330

Registered user
Joined
May 11, 2023
Messages
130
Reaction score
33
Location
bridgend
hi guys,

sorry about this bikes not with me and i know i need new screws 8 of for the clutch and brake lids covers
anybody know off hand sizes i know countersunk possibly m4 need the lengh and is it m4

cheers guys

rob
 
thanks for that i,ll source some m4x16 stainless would you recommend philips or allen key fitting

rob
IF you use stainless?? Remember to use alloy anti seize paste NOT copperslip as you can get a 3 way Electrolytical reaction going on

And that can lead you to a whole world of hurt later on

So many Stainlessbolts stuck in bikes I have been working on over the years
 
IF you use stainless?? Remember to use alloy anti seize paste NOT copperslip as you can get a 3 way Electrolytical reaction going on

And that can lead you to a whole world of hurt later on

So many Stainlessbolts stuck in bikes I have been working on over the years
can you give me a pointer to a alloy anti seize grease put that in flea bay not clear if thats what they do cheers rob
 
can you give me a pointer to a alloy anti seize grease put that in flea bay not clear if thats what they do cheers rob
is this ok
 
is this ok
I tend to stay with a brand name to be honest

 
As per....
 

Attachments

  • 61qhpZrxBiL._AC_UF1000,1000_QL80_FMwebp_.webp
    61qhpZrxBiL._AC_UF1000,1000_QL80_FMwebp_.webp
    46.1 KB · Views: 5


Back
Top Bottom