Clutch Bleed On 1150GSA Which Type of Nipple?

[james0133]

I need to bleed the clutch on my 1150GSA. It looks like I need a nipple or bleed valve. Which is best to use?

I found there two on eBay. One is a valve with ball and spring and one is just a regular bleed nipple:

http://cgi.ebay.co.uk/ws/eBayISAPI....akeTrack=true&ssPageName=VIP:watchlink:top:en

http://cgi.ebay.co.uk/ws/eBayISAPI....akeTrack=true&ssPageName=VIP:watchlink:top:en

 

[Steptoe]

I need to bleed the clutch on my 1150GSA. It looks like I need a nipple or bleed valve. Which is best to use?

I found there two on eBay. One is a valve with ball and spring and one is just a regular bleed nipple:

]

You already have a bleed unit attached to the clutch- valve/ball and spring.

Undo the small grub screw and insert a bleed nipple, bleed away, remove nipple and re-insert grub screw.

If you don't have a bleed nipple just use a small pointed implement to force the ball beraring open and bleed away.

 

[james0133]

I have ordered a bleed nipple and will change the fluid during the week. A friend has a vacuum bleeder which I will borrow to make the job easier.
Thanks for the reply.