Coding Plug, what exactly does it do.

[Paul G (BHT)]

Does anyone know if the coding plug does anything other than allow the Enduro Pro mode to be selected?

Does it effect the way in which the ESA behaves in the other modes?

 

[pistole]

enables enduro pro

 

[Reckless]

Handbook page 92 - full details.

 

[GrinningGSer]

I read somewhere on your site(Windychuffer), that it just shorts two wires enabling Enduro Pro. The poster claimed that it's an easy DIY job Caveat: May not be true !
Read Windychuffer's comment in this post

 

[Nutty]

Does it effect the way in which the ESA behaves in the other modes?

Yes. It stores your suspension setting if you change from the default, for example, if you set the ESA to soft, while in dynamic, it will remember this the next time you ride the bike.

 

[WindyChuffer]

I read somewhere on your site(Windychuffer), that it just shorts two wires enabling Enduro Pro. The poster claimed that it's an easy DIY job Caveat: May not be true !
Read Windychuffer's comment in this post

What is not true about what I wrote?

 

[GrinningGSer]

No offense meant Windy. Is your statement evidence based ?

 

[WindyChuffer]

No offense meant Windy. Is your statement evidence based ?

Yes. From tech expert at dealer. If you look at the plug and put a multimeter on it...

 

[Paul G (BHT)]

Yes. It stores your suspension setting if you change from the default, for example, if you set the ESA to soft, while in dynamic, it will remember this the next time you ride the bike.

Thanks Rich, that's what I was looking for

Had already read the manual hence the question as it didn't explain this.

 

[Schtum]

Had already read the manual hence the question as it didn't explain this.

"If the coding plug is not fitted, the basic setting specified by the riding mode will be set after each mode change. If the coding plug is fitted, the driver's adjustments are retained for all modes."

Page 69

 

[Paul G (BHT)]

"If the coding plug is not fitted, the basic setting specified by the riding mode will be set after each mode change. If the coding plug is fitted, the driver's adjustments are retained for all modes."

Page 69

Is it just me that finds it hard reading anything that is on paper rather than an electronic version?

 

[Nutty]

Is it just me that finds it hard reading anything that is on paper rather than an electronic version?

Not just you. I haven't read my manual yet, I just press all the buttons and see what they do!

 

[Schtum]

Is it just me that finds it hard reading anything that is on paper rather than an electronic version?

Why do you think I copied and pasted that from here - http://www.bmw-motorrad.de/de/de/se...itungen/com/PDF/R_0A01_RM_0213_R1200GS_01.pdf