any one out there got a copy of the wiring instructions and setting up they could let me see? regards nick
confusion with techclusion
- Thread starter Nick Marshall
- Start date
The Mechanic
Guest
Try here....
There is a report and set-up for the Techlusion at
http://www.ibmwr.org/
Hope that helps you out
There is a report and set-up for the Techlusion at
http://www.ibmwr.org/
Hope that helps you out
Are they different Techlusion for single or twin spark GS's?
techclusion
wish i knew! nick
wish i knew! nick
Rod Souter
Registered user
I have a 1030 model, initially fitted to a single spark 1150, now on a twin spark. In both instances set up via a rolling road.
Rod
Rod
schnauzer
Guest
R259 model on an '03 adv twin spark, I think the r259 is BWM's engine designation too?
BiG DoM
Registered user
Les Wassall said:
Go ask on their website but feel sure it works on all R259 engines - 2 spark or 4 ... after all it plugs into one injector...
and lamda sensor - number of sparks of no consequence.
Panzer Patrol
Registered user
Yup, the 259 box works on both single and twin sparks. Metal Man has used his on both. 
motohansa
Guest
The 1031 techlusion will fit all R1100 & all R1150 BMW's. For any other info/settings/supply on techlusion I will be happy to help.Les Wassall said:
Taipan
Guest
From what I can gather, the 1030/1 was the older model Techlusions. Some of which (1030?) you had to cut and join wires to fit it to the BMW loom?
The R259 is the newer type and has matching BMW connectors and clips directly into the loom. It works on single or twin sparks. It is more dependant on your connector type.
The later BMWs normally have the 1032 type, or at least my 03 Rockster does. See plug types below.
R259 fitting instructions here.
1030 fitting instructions here.
The R259 is the newer type and has matching BMW connectors and clips directly into the loom. It works on single or twin sparks. It is more dependant on your connector type.
The later BMWs normally have the 1032 type, or at least my 03 Rockster does. See plug types below.
R259 fitting instructions here.
1030 fitting instructions here.
i was told by techlusion USA & TTS that the 259 is better suited for folks keeping the cat & the 1030/1 was what you wanted for y piece & can etc.
never did see the logic in that but that's what i was told.
1030 models have to be spliced into the trigger wires for the FI. a bit tricky as the wires are pretty short, hard to lengthen 'cos of access and also rather thin guage.
techlusion supply some of those nasty connectors that cut through the insulation to connect. name for these aboninations escapes me, i must have purged it from memory*.
i would avoid such a bodge on my bike.
*i've remembered: Insulation Displacing Connector
never did see the logic in that but that's what i was told.
1030 models have to be spliced into the trigger wires for the FI. a bit tricky as the wires are pretty short, hard to lengthen 'cos of access and also rather thin guage.
techlusion supply some of those nasty connectors that cut through the insulation to connect. name for these aboninations escapes me, i must have purged it from memory*.
i would avoid such a bodge on my bike.
*i've remembered: Insulation Displacing Connector
fast boy
Guest
nick
i guess then that my tech box was ok after all
cheers nick
i guess then that my tech box was ok after all
cheers nick
Similar threads
