PRR said:
Please remember that Pan European is echoing Garmin messages and you will have to filter his opinions to have the truth. For a long time Garmin didn't receive the ESTB (EGNOS System Test Bed) signals when other manufacturers did and of course Garmin wouldn't promote enabling EGNOS at that point...
PRR:
You think I am just echoing Garmin messages, and you state that I am being less than truthful here? Go jump in a lake.
The only difference between the current GPSR software (that says EGNOS) and the previous versions of GPSR software (that said WAAS) is that Garmin has improved their localization of the user interface, so that Americas GPSRs say WAAS and European ones say EGNOS. It's entirely a cosmetic difference. In theory, all of the GPSRs should say SBAS, but a decision was made to refer to the augmentation systems by the local name used for the augmentation system in each world region.
All of the Satellite Based Augmentation Systems (SBAS, to use the most precise term) follow the same specifications: An augmentation transponder on a commercial satellite - not one of the GPS constellation satellites - broadcasts a correction signal that is received and interpreted by a SBAS capable GPSR. The GPSR then makes the appropriate correction in order to determine receiver position with greater accuracy.
Because the SBAS specification is the same worldwide - for the FAA WAAS system, the ESA EGNOS system, the Japanese MTSAT-2 system, etc., any GPSR that works with one system will work with any other system, provided that the system operator has released full specifications, to allow the GPSR to know where to look for the signal.
I remember spending two months back in the winter of 2004-2005 testing Garmin GPSRs with the EGNOS testbed based out of Zurich. The GPSR picked up the EGNOS signal just fine, as long as the ESA were transmitting the signal. At that time, transmissions were erratic because it was still in test. I have not been in Europe for the past 4 months, so, I can't give you an update on how the system is performing at this time.
You made a few comments in your post above that reveal an incorrect understanding on your part of the basic concepts of the satellite constellation. You wrote:
PRR said:
Really, please explain why you need 12 channels? The argument for a high number of channels is to improve accuracy, but since you say you don't need accuracy I don't understand your logic. Also when there are more than 10 satellites present, usually some of them will be as close to the horizon as the EGNOS ones are... ...I'm still waiting for a credible explanation to why we can't spare a few channels in a 12 channel-receiver. Until then I find no harm in having EGNOS enabled.
Let me try to answer your questions, and correct your misconceptions.
1) Geostationary vs. elliptical orbits
The augmentation transponders (SBAS transponders) are carried by commercial satellites that are in geostationary equatorial orbits. The further north you go, the more difficult it will be to receive them in a terrestrial vehicle. However - the further north you go, the less you need augmentation, because the geometry of the conventional GPS satellite constellation is such that you will get the best possible view of the satellite constellation from either the north pole or the south pole. In other words - the closer you get to a pole, thus, the more difficult it becomes to pick up the augmentation satellite - however, who cares, because the closer to a pole you get, the less you need the signal from the augmentation satellite. Think about it.
2) Why do you want 12 channels, not 10?
It's simple. When you are using GPS navigation in a terrestrial vehicle (rather than in a boat, or an aircraft) your GPSR's view of the satellite constellation is continually being interrupted by buildings, trees, and landforms. You only need 4 satellites in view to get a reasonable position fix - that is to say, a position fix that is sufficient for automotive navigation. If, however, your GPSR has the capability of tracking 12 satellites, that means you can lose up to 8 of them at any one time (due to parts of the horizon being obstructed) and still maintain satisfactory tracking.
On the other hand, if you enable the SBAS function, you set aside two of the twelve channels for dedicated tracking of the augmentation satellites. You now only have 10 channels available for tracking the GPS constellation. If you lose more than 6 of those satellites, you will lose your position fix, and, I can assure you, if you lose more than 6 satellites due to terrain, building, or vegetation obstructions, you will also have lost all view of the augmentation satellites as well.
Finally - as has been stated before - the automotive GPSRs are designed to have a magnetic attraction to the charted depiction of the roadway, even if that means making allowances for cartographic errors that might result in the roadway being depicted a few meters away from where it actually is. There's no point in having two meter accuracy on a roadway that it typically 10 or more meters wide, most especially when the GPSR will, by design, discard that accuracy in favour of depicting your vehicle position as 'on the roadway' if there is any question about where you actually are when you are proximate to a roadway.
Kind regards,
Michael