Electrical help please.

[Katy M]

I started fitting wiring to take an accessory today and tw*t that I am broke the cardinal rule of not disconnecting the battery first-arse!!!
I shorted out across the terminals and have an 'odd' problem:
I didn't blow any fuses- that I can see any way- and the engine still turns over and starts and all appears in order. However, where I could once test and get a circuit from the point (see picture) I now don't; it's as if the feed to my terminal is dead.
Hopefully I've got a picture uploaded. I'm trying to feed off the front terminal (the brown cable) and shorted across this to the one behind.
As I said, everything seems fine but I'm worried about running it in case I've cooked something somewhere.
Oh, it's a 2006 990 Adventure by the way and the image is of the 'terminal' at the side/bottom of the battery..
Help please!!

 

[Gecko]

Katy
Sorry I don't know anything about KTM's but have you got an alarm and immobiliser fitted - if so you will probably need to reset it after any electrical fettling to get anywhere . If you haven't got one then all I can do it wish you luck ..... or sell you a GS

 

[John Armstrong]

Tried disconnecting the +ve and -ve termianls for a minute or two and then reconnecting them back up? Just in case you've confused the logic in any of the circuits.

 

[Katy M]

Thanks

Thanks all for looking and the advice. Dunno what I did but I've taken it out for a long spin and everything seems fine!
Promise not to do it again!!!