sven
Registered user
If it's a twin cam then a valve check is not part of the 600 mile service, unlike the pre 2010 models.
Neither is retightening the cylinder head bolts; it's basically an engine and shaft drive oil change.
If it's a twin cam then a valve check is not part of the 600 mile service, unlike the pre 2010 models.
Neither is retightening the cylinder head bolts; it's basically an engine and shaft drive oil change.
I am old enough to remember when Citroen stopped checking head bolt torque on their air cooled boxer twins. Had lots of problems with poor running, mainly cause by tight valve clearances that previously would have been checked after the heads were re torqued. Even a few engine failures. Hope the same does not apply here.
John
When I took my 2010 GS in for it's 600ml service and was asked for £180 , I said all other bikes I've had, the 600 svs was free. She said "welcome to the world of BMW".......![]()
Was that with Mike at Cardiff Motorrad?
That's where you need to go![]()
I remember the days when it was free on the 1150's![]()


It was free on my 2004 1200.
![]()

Don't pay any more than £100, if they won't do it for this then shop around, plenty will