Fitting Scala to BMW System 4 helmet question.

[Gerry47]

Has anyone fitted a Scala Rider to a BMW System 4 helmet or similar? The clamp is supposed to slide between the lining and the helmet shell but I can't see how that will work without cutting the lining. Can it be fitted to the movable chin piece? Any advice/photo greatly appreciated, thanks.

 

[Padge]

I had a pain in the hole getting it onto the System 5.
Problem is the unit would sit too far back for the mike to reach and the Clamp would not sit anywhere neat.

One guy had posted that he fitted it to the chin piece, but I didn't like the idea of this so I was going to do away with the bracket and just glue it to the helmet. Eventially, I actually drilled 2 small holes in the skirt of the helmet and screwed it with no bracket.

Unfortuantely this meant I had to cut and solder a bit or wire onto the mike boom to make it longer, but it only took 10 mins and does the trick.

 

[pedmo]

I cut a small slot in the lining to fit mine into a system 4

 

[Gerry47]

Thanks for the adivice, I'll try drilling as well I think, looks neat enough.